One of the answers to the energy crisis is to apply solar power. Solar power is the energy source of the most powerful and freely available to us now. That is why production of solar energy kits more abundant.
Solar energy kits is slowly taking place in most of the different houses in the world. Householders feel easy, convenient and effective to obtain energy from the sunlight.
Executive Summary about Sun Power by Richard Chapo
Generating electricity from the sun is all about converting sunlight into power. The technology behind solar systems is known as photovoltaic technology. Essentially, this technology involves using sunlight to create a chemical reaction. This process creates a direct current of electricity. The electricity is then converted to usable alternating current electricity and stored in a battery or fed into a utility grid system.
Executive Summary about Solar Fan by Peter I. Wilson
Solar power fans are very easy to install, and also completely free to run. The majority of solar powered fans have a built in solar panel. Why Should I use Solar Power Fans in my Attic?
The solar powered fans do not require any extra power which would make your electricity bill more expensive. The other really good feature about solar powered fans is that they’re really easy to install. Newer homes are including these solar powered fans as standard, however if you own an older style home then you should consider installing these fans. You can buy fans suitable for fitting into older style homes.
What’s the real truth behind all those ads?
Just searching around online for information about solar power, solar energy, and installing solar panels on your own home, you’ve probably run across many claims which say you can earn money from solar power. So is it true? Yes… sort of.
A product design is not just an isolated object, but also the complex network of relationships that constitute it for what it will be understood in context. This work wants to build a network of environmental sustainability and putting the individual at the center of this network.
Adventures in microsolar supported by microelectronics and MEMS techniques
Representative thin crystalline-silicon photovoltaic cells – these are from 14 to 20 micrometers thick and 0.25 to 1 millimeter across.
Sandia National Laboratories scientists have developed tiny glitter-sized photovoltaic cells that could revolutionize the way solar energy is collected and used.
The tiny cells could turn a person into a walking solar battery charger if they were fastened to flexible substrates molded around unusual shapes, such as clothing.
The solar particles, fabricated of crystalline silicon, hold the potential for a variety of new applications. They are expected eventually to be less expensive and have greater efficiencies than current photovoltaic collectors that are pieced together with 6-inch- square solar wafers.
The cells are fabricated using microelectronic and microelectromechanical systems (MEMS) techniques common to today’s electronic foundries.
Sandia lead investigator Greg Nielson said the research team has identified more than 20 benefits of scale for its microphotovoltaic cells. These include new applications, improved performance, potential for reduced costs and higher efficiencies.
“Eventually units could be mass-produced and wrapped around unusual shapes for building-integrated solar, tents and maybe even clothing,” he said. This would make it possible for hunters, hikers or military personnel in the field to recharge batteries for phones, cameras and other electronic devices as they walk or rest.
Sandia project lead Greg Nielson holds a solar cell test prototype with a microscale lens array fastened above it. Together, the cell and lens help create a concentrated photovoltaic unit.
Even better, such microengineered panels could have circuits imprinted that would help perform other functions customarily left to large-scale construction with its attendant need for field construction design and permits.
Said Sandia field engineer Vipin Gupta, “Photovoltaic modules made from these microsized cells for the rooftops of homes and warehouses could have intelligent controls, inverters and even storage built in at the chip level. Such an integrated module could greatly simplify the cumbersome design, bid, permit and grid integration process that our solar technical assistance teams see in the field all the time.”
For large-scale power generation, said Sandia researcher Murat Okandan, “One of the biggest scale benefits is a significant reduction in manufacturing and installation costs compared with current PV techniques.”
Part of the potential cost reduction comes about because microcells require relatively little material to form well-controlled and highly efficient devices.
From 14 to 20 micrometers thick (a human hair is approximately 70 micrometers thick), they are 10 times thinner than conventional 6-inch-by-6-inch brick-sized cells, yet perform at about the same efficiency.
100 times less silicon generates same amount of electricity
“So they use 100 times less silicon to generate the same amount of electricity,” said Okandan. “Since they are much smaller and have fewer mechanical deformations for a given environment than the conventional cells, they may also be more reliable over the long term.”
Another manufacturing convenience is that the cells, because they are only hundreds of micrometers in diameter, can be fabricated from commercial wafers of any size, including today’s 300-millimeter (12-inch) diameter wafers and future 450-millimeter (18-inch) wafers. Further, if one cell proves defective in manufacture, the rest still can be harvested, while if a brick-sized unit goes bad, the entire wafer may be unusable. Also, brick-sized units fabricated larger than the conventional 6-inch-by-6-inch cross section to take advantage of larger wafer size would require thicker power lines to harvest the increased power, creating more cost and possibly shading the wafer. That problem does not exist with the small-cell approach and its individualized wiring.
From left to right, Sandia researchers Murat OKandan, Greg Nielson, and Jose Luis Cruz-Campa, hold samples containing arrays of microsolar cells.
Other unique features are available because the cells are so small. “The shade tolerance of our units to overhead obstructions is better than conventional PV panels,” said Nielson, “because portions of our units not in shade will keep sending out electricity where a partially shaded conventional panel may turn off entirely.”
Because flexible substrates can be easily fabricated, high-efficiency PV for ubiquitous solar power becomes more feasible, said Okandan.
A commercial move to microscale PV cells would be a dramatic change from conventional silicon PV modules composed of arrays of 6-inch-by-6-inch wafers. However, by bringing in techniques normally used in MEMS, electronics and the light-emitting diode (LED) industries (for additional work involving gallium arsenide instead of silicon), the change to small cells should be relatively straightforward, Gupta said.
Each cell is formed on silicon wafers, etched and then released inexpensively in hexagonal shapes, with electrical contacts prefabricated on each piece, by borrowing techniques from integrated circuits and MEMS.
Offering a run for their money to conventional large wafers of crystalline silicon, electricity presently can be harvested from the Sandia-created cells with 14.9 percent efficiency. Off-the-shelf commercial modules range from 13 to 20 percent efficient.
A widely used commercial tool called a pick-and-place machine — the current standard for the mass assembly of electronics — can place up to 130,000 pieces of glitter per hour at electrical contact points preestablished on the substrate; the placement takes place at cooler temperatures. The cost is approximately one-tenth of a cent per piece with the number of cells per module determined by the level of optical concentration and the size of the die, likely to be in the 10,000 to 50,000 cell per square meter range. An alternate technology, still at the lab-bench stage, involves self-assembly of the parts at even lower costs.
Solar concentrators — low-cost, prefabricated, optically efficient microlens arrays — can be placed directly over each glitter-sized cell to increase the number of photons arriving to be converted via the photovoltaic effect into electrons. The small cell size means that cheaper and more efficient short focal length microlens arrays can be fabricated for this purpose.
High-voltage output is possible directly from the modules because of the large number of cells in the array. This should reduce costs associated with wiring, due to reduced resistive losses at higher voltages.
Other possible applications for the technology include satellites and remote sensing.
The project combines expertise from Sandia’s Microsystems Center; Photovoltaics and Grid Integration Group; the Materials, Devices, and Energy Technologies Group; and the National Renewable Energy Lab’s Concentrating Photovoltaics Group.
Involved in the process, in addition to Nielson, Okandan and Gupta, are Jose Luis Cruz-Campa, Paul Resnick, Tammy Pluym, Peggy Clews, Carlos Sanchez, Bill Sweatt, Tony Lentine, Anton Filatov, Mike Sinclair, Mark Overberg, Jeff Nelson, Jennifer Granata, Craig Carmignani, Rick Kemp, Connie Stewart, Jonathan Wierer,
George Wang, Jerry Simmons, Jason Strauch, Judith Lavin and Mark Wanlass (NREL).
The work is supported by DOE’s Solar Energy Technology Program and Sandia’s Laboratory Directed Research & Development program, and has been presented at four technical conferences this year.
The ability of light to produce electrons, and thus electricity, has been known for more than a hundred years.
It is always essential to get sure that the good solar companies is selected by the purchasers when they are going to purchase a solar cell or panel for either commercial or residential uses.
It is so simple to check the performance of company by seeing at the standard of their products. The greatest solar power companies commonly supply the purchasers with products that are suitable to meet the needs of the clients and the others commonly lead the consumers to purchase a product that is costly and may not be solution to their questions.
It is urgent for the consumers to get proper direction as without it they are probably to be misinformed and might finish purchasing something that takes costly resources and is not as good as it was so-called to have been. The greatest solar power companies commonly supply their consumers with suggestions on the true and efficient use of the solar power products that are purchased by them.
It has to be thought by the purchasers that the size and the performance of the company are not connected or equal concepts in case of the solar power companies. It is not required that the bigger companies are the greatest in the business. The experience of the company is highly essential in such cases.
The purchasers have to ensure positive facts and they would be able to check, for themselves, the performance of the company. Components like the amount of long time of operation, the amount of systems set up and the background of the company are great indicators of the company’s model.
The clients should do their research too before they start to purchase product from a specific solar companies. The purchasers must have good knowledge of the several items of the solar power products they are getting to purchase so that they are in a well situation when they go to buy these products. The research also enables the consumers to ask essential enquiries of the companies.
The purchaser also needs to be perfectly sure of what he needs as that would enable him to deal more fruitfully with the special solar companies. In cases where the purchaser needs to switch the energy system into a solar one the customised solar power systems are the greatest. The purchasers can also go for companies that work in their vicinity. The essential reason behind this is the fact that the local companies can address the several troubles looked by the owners of the solar power systems than several company which is not in the vicinity of the owner. They can also play activities like replacing of machine pieces or maintenance of machines way better than a company that is located at a distance form the owner.
Solar technologies is now highly developed, with some progress is being developed to be used every day.
Below 10 Solar Technologies to note:
Initial concept of light tubes developed by the ancient Egyptians, namely by direct use of natural light tubes with reflective material. This is the concept of the oldest and most widespread type of natural lighting of interior space.
Light tubes are also known as “tubular skylight”, “SunScope” or “Tubular Daylighting Device” allow natural light into the darkened interior room of buildings and houses. The people enjoy the natural lighting provided by skylights. However, skylights are often not evenly distribute the light, is the loss of a significant source of energy, and UV light can cause damage to the carpet and furniture. Light tubes, on the other hand, using the sun for lighting interiors without the shortcomings associated with conventional skylights. To prevent the danger of ultraviolet radiation (UV) from the carpet and furniture fading, UV inhibitors formed a dome roof on most models. Another bonus when choosing light tubes is that they provide far more heat slightly, as did the standard skylights. Because of the lack of acceptance of this heat, tubular skylights to save money on air conditioning bills during hot months.
Taking advantage of free sunlight as much as possible, the pipe hole collect sunlight from the roof dome light collector consists of an acrylic lens, bounce it to the bottom of a tube with a highly reflective interior coating, to pull the lens cap is similar to conventional recessed lighting equipment and diffuse sun light evenly throughout the interior rooms. The tube can be bent and adapted to drive around the garret or ceiling obstructions with small loss of light transmitting and can often be installed in less than three hours. Not like the ceiling of need roof to the ceiling of the timber-framed shaft and covered with drywall or wood panels, and the need for structural modifications, so installation is simple and relatively inexpensive.
Roof mounted dome made of high quality acrylic resin specially formulated to enhance the impact strength, chemical, weather resistance and high clarity.
Light tubes can be installed on almost all types of roof materials, including wood and asphalt shingles, concrete and ceramics, and metals. Thanks to a highly reflective coating on the rod, the tube can work efficiently from sunrise to sunset.
Most of the producers of glass tubular solar roof offers a 10-year warranty against defects in materials and post-installation cracks or discoloration. Tubes solar installation contractors generally offer a 2-3 year warranty for the installation of weatherproofing and storm protection.
The average size of the tubular skylight ranges between 10 and 21 inches (254 and 533 mm), diameter, which effectively light of 100-600 square feet (30,48-182,88 meters), interior space. The main factor in choosing a general measure of the distance between the roof rafters and / or ceiling beams.
Prices range from around $ 171.00 to $ 423.00. Installing a solar tube usually cost between $ 500 and $ 800. Both depend on the size of tubes and features installed.
Light tube options include:
Energy-efficient light tubes is an important part of the house and environmentally friendly buildings. Natural light effects on your physical, emotional and psychological well known as the rooms benefit from natural sunlight free will positively impact our environment for future generations. They are environmentally-friendly way to naturally brighten every room, a smart alternative to skylights and artificial lighting.
You may have seen a calculator that has a solar cell? calculator that does not need batteries, and in some cases do not even have the off button. As long as you have enough light, so the calculator can be on at any time and forever. You may have seen larger solar panels, such as in housing or traffic lights, haven’t you? In this article I will review how solar cell work so it can deliver the energy and drive an electronic device.
Today the demand for electricity has become a major requirement in all corners. The presence of power plants sometimes do not solve the need for electricity especially in remote areas where the terrain is always an excuse. Here an alternative energy that can be easily found in nature and can be used as an alternative free energy replacing conventional electricity, because it can turn on household electronics such as televisions, radios and lights.
Solar cells made from pieces of a very small silicon coated with special chemicals to form the basis of solar cells. Solar cells generally have a minimum thickness of 0.3 mm is made from semiconductor materials incision with positive and negative poles. Each solar cell produces usually voltage 0.5 volts. Solar cells is an active element (semiconductor) that utilizes photovoltaic effect to transform solar energy into electrical energy.
Solar cells contain a connection (junction) between two thin layers made of semiconductor materials, each of which is known as a semiconductor type “P” (positive) and semiconductor type “N” (negative).
N-type semiconductor made of silicon crystals and there are also some other materials (typically phosphorus) within the limits that these materials can provide an excess of free electrons.
Electrons are sub atomic particles are negatively charged, so that the silicon alloy in this case known as N-type semiconductor (Negative). P-type semiconductor made of silicon crystal in which there is a small amount of other material (typically boron) which caused the shortage of material free electrons. Lack or loss of electrons is called a hole. Because there is no or lack of electrons electrically negative charged then the silicon alloys in this case as a semiconductor type-P (Positive).
Composition of a solar cell, the same as a diode, consisting of two layers, called PN junction. PN junction obtained by staining a pure semiconductor silicon (valence 4) with the impurity valence 3 on the left side, and one on the right impurity stained with valence 5.
The effect of the electric field in a PV cell
Operation of a PV cell
Basic structure of a generic silicon PV cell
Thus formed on the left side that is not pure silicon again and called P type silicon, while the right side is called silicon type N. In the pure silicon there are two kinds of electrical charge carriers are balanced. Positive electric charge carriers called holes, while the negative are called electrons. After a desecration process, in the P type silicon formed holes (positive charge carriers) in a very large number compared with the electron. Therefore, in the P type silicon holes are majority charge carriers, while the electrons are minority carriers. Conversely, in the N type silicon is formed of electrons in a very large number so-called majority carriers, and holes called minority carriers.
In the silicon rod there was interaction between the P and the N. Therefore called the PN junction. When present, the P associated with the positive pole of a battery, while the negative polar associated with the N, then there is a relationship called “forward bias”.
Under forward bias, electrical currents arise in a series due to both types of charge carriers. So the electric current flowing in the PN junction is caused by the movement of electron and the movement of holes. An electric current is flowing in the direction of holes movement, but opposite direction with the movement of electrons. Just to further explain, electrons moving in the conductor material can lead to electrical energy. And electrical energy is called as an electric current that flows in the opposite direction to the movement of electrons.
But, if the P associated with negative pole of batteries and the N associated with positive pole, then now formed a relationship called “reverse bias”. In these circumstances, the hole (positive charge carriers) can be connected directly to the positive pole, while the electrons are also directly to the positive pole. So, clearly in the PN junction there is no movement of majority charge carriers either the holes or electrons. Meanwhile, the minority charge carriers (electrons) in the part P moves trying to reach the positive pole of the batteries. Similarly, the minority charge carriers (holes) in the N also moved to reach the negative pole. Therefore, in a state of reverse bias, in the PN junction there is also output current even in very small amounts (micro amperes). This current is often called the reverse saturation current or leakage current.
.
Anything interesting in reverse bias. When the temperature of PN junction raised they will be able to enlarge leakage current. Means that if given the energy (heat), the minority charge carriers in the PN junction grows. Because the light is one form of energy, so if there is light that hit a PN junction may also produce enough energy to generate charge carriers. This symptoms are called photoconductive. Based on the photoconductive symptoms made of photodiode electronic components from PN junction.
In reverse bias, with increasing intensity of light that hit photodiode can increase the level of leakage current. Leakage currents can also be enlarged by increasing the battery voltage (reverse voltage), but the addition of leakage currents were not significant. When the batteries in the reverse bias circuit is removed and replaced with a load of resistance, the provision of light that can cause charge carriers both holes and electrons. If the illumination light is increased, current output was greater. Such symptoms are called photovoltaic. Light can provide enough energy to enlarge the number of holes in the P and the number of electrons on the N. Based on the symptoms of this photovoltaic electronic components can be created photovoltaic cell. Because usually the sun as a source of light, the photovoltaic cell is also called the solar cell (solar cells) or a solar energy converter.
So the solar cell is essentially a large photo diode and designed by referring to the photovoltaic symptoms so that could produce the greatest possible power. P type silicon is the very thin surface layer so that light can penetrate directly reach the junction. Part P is given ring-shaped nickel layer, as a positive output terminal. Under the P is the N type that is coated with nickel as well as the negative output terminal.
To obtain a large enough power required much of solar cells. Usually, solar cells arranged form the shape of the panel, and is called the photovoltaic panels (PV). PV as a source of electric power was first used in satellites. Then PV as an energy source for cars, so there are solar electric car. Now, in foreign countries, PV has started to be used as a roof or wall of the house. Sanyo has made even a semi-transparent PV that can be used as a substitute for glass.
After getting the output of the solar cell is a direct electrical current can be used to load utilized. But also the electric current can be used as a charge stored by the battery to be used when needed, especially at night because there was no sun.
If the solar cell is used for storage into the battery, then the resulting voltage magnitude must be above the battery specification. For example the battery used is 12 volts, the voltage produced by solar cell must be above 12 volts in order to perform charging.
We recommend that before carrying out the charging battery should be empty because the incoming flow will be filled with the maximum. The unit capacity of a battery is the Ampere-hour (Ah) and these characteristics are usually found on the label of a battery. For example a battery with 10 Ah capacity will fill up for 10 hours with the solar cell output currents of 1 Ampere.
Executive Summary about Solar Electricity by Melanie Crouse
There are even tax rebates available in many states for families that are converting to home solar electricity. If you’ve been thinking of using PV (photovoltaic) panels for your home solar power, but are finding that it is too expensive, there are other options. There are many green energy suppliers that provide power from various renewable resources, such as solar electricity, wind power and hydroelectricity. If you’ve decided that solar power is the way you want to go, you will need to determine your actual power needs first.
The first thing you need to determine is how much electricity you need your home solar electricity system to generate. Do you want a grid-tied system where you are still connected to the grid, using a combination of your own solar power and the power supplied by the utility company? Or you can combine your own home solar electricity system with the grid, selling back any excess power that you don’t use to the power
Designing Solar Electricity Systems For Your Home
Executive Summary about Solar Electricity by Gary Ashby
Are you interested in designing solar electricity systems for your home? Before you build your homemade solar electricity systems, you must first consider the electrical requirements of your household as well as how much energy you wish to generate with the solar panel system.
1. Are You Comfortable Working On The Roof?
2. Is There Enough Space On Your Roof For Solar Panel Installation?
Your roof needs to have enough space for you to build sufficient solar panels on it.
3. What Happens When You Are Able To Generate More Electricity Than The Amount That Your House Requires?
4. How Exactly Do You Put a Solar Electricity System In Your Home?
Thousands of people have already eliminated their own home electricity bills with this free solar energy system that they learned how to build with a step-by-step guide online.
Article You May Be Interested In Reading: Solar Battery
Executive Summary about Solar Battery Charger by Anna Stone
Solar Battery Chargers are used to charge your batteries when you are not connected to the power grids and do not have access to another form of electricity. The way a Solar Charger works is simple. The solar panel of the battery charger collects energy from the sun and converts this into electricity. Now, there are many different types of solar battery chargers, as well as different types of batteries you might want to charge. Some solar chargers are more powerful than others. As all solar battery chargers use some type of solar panel, the amount of power they generate generally depends on the size of the panels. Solar panels are made up of individual solar cells. Solar cells are the units which create electricity out of sunlight. The more solar cells there are on a solar panel, the more electricity they create. So you will generally find that bigger solar panels produced more energy, and smaller solar panels produce less.
Some solar battery chargers work with simple AA batteries, like those that you would use to run a flashlight. Some charge the batteries of your equipment, such as the battery in your laptop computer.
You might ask why one uses a solar charger to charge a battery, instead of just directly running one’s equipment from a solar panel.
The sun’s heat might damage your cell phone. There are a variety of solar battery chargers and other portable solar power devices available on the market today. Further information and answers to common questions can be found at Solar Chargers and Portable Solar Power Devices.
How Solar Powered Battery Chargers Can Ease Your Everyday’s Life
Executive Summary about Solar Battery Charger by Assaf Katzir
Solar battery charger is one of these devices that became a necessity once we have all these electric devices that we use on a daily basis. iPod, laptop, mobile phone, PDA, GPS etc’ just name it. There are portable flexible solar panels that you can place in your small bag and use them to charge your electrical devices’ batteries when you need to without being attached to any electrical grid outlet. Most solar chargers are equipped with plug kits which match to variety of electric devices. The variety of solar chargers’ sizes, shapes and uses continue to grow rapidly.
There is no usage cost when using solar battery chargers as opposed to the utility electricity chargers. No pollution released to the atmosphere when using portable solar charger and no chemicals leached into our ground water when discarded since we are using rechargeable batteries, so you contribute to keep environment clean, not to mention that you save money when you use a solar charger.
As you can see there are many benefits and advantages while using solar powered battery charger.
Article You May Be Interested In Reading: Solar Heater
Executive Summary about Solar Heater by Michelle Bery
A solar heater literally harnesses the energy of the sun. The sun’s core holds enormous energy in the form of radiation; the energy that reaches the earth is considered solar energy.
In the case of a solar heater, we literally “collect” the solar energy that makes its way to earth. Flat plate collectors are thin panels that trap, store, and convert solar energy. When the sun hits the flat plate collector the solar energy is contained inside and used to heat coils within the collector. Those larger structures that are using solar energy find this type of solar heater far more effective for their purposes.
Solar Water Heaters
Executive Summary about Solar Heater by Shweta Rai
Solar water heaters are extremely useful household appliance. These heaters provide ample warm water. Unlike other water heaters, these do not harm the environment. Researches too have proved that these water heaters are quite beneficial. Due to these advantages, solar water heaters are recommended every where.
How solar water heater works?:
These heaters come with storage tank and solar collector. The water is passed through the storage tank and it is heated due to sunlight. There are two pipes, which connect the solar water tank to water heater inside the house. Outlet pipe carries warm water from solar heater to standard heater. The second pipe carries the water in opposite direction. The water heater is painted black, to absorb a lot of light.
How to install these heaters?:
Consult the buyer before buying these water heaters. Make sure that these heaters are placed facing the sun.
What can be approximate cost of these heaters?
Solar water heater cost vary to a large extent.
What are major benefits of these water heaters?
These Water heaters have a number of advantages. They are environment friendly and do not cause any pollution. Secondly, they reduce your electricity expenditure to a large extent
Check out my other guide on Garden Lights
