A product design is not just an isolated object, but also the complex network of relationships that constitute it for what it will be understood in context. This work wants to build a network of environmental sustainability and putting the individual at the center of this network.
Solar technologies is now highly developed, with some progress is being developed to be used every day.
Below 10 Solar Technologies to note:
You may have seen a calculator that has a solar cell? calculator that does not need batteries, and in some cases do not even have the off button. As long as you have enough light, so the calculator can be on at any time and forever. You may have seen larger solar panels, such as in housing or traffic lights, haven’t you? In this article I will review how solar cell work so it can deliver the energy and drive an electronic device.
Today the demand for electricity has become a major requirement in all corners. The presence of power plants sometimes do not solve the need for electricity especially in remote areas where the terrain is always an excuse. Here an alternative energy that can be easily found in nature and can be used as an alternative free energy replacing conventional electricity, because it can turn on household electronics such as televisions, radios and lights.
Solar cells made from pieces of a very small silicon coated with special chemicals to form the basis of solar cells. Solar cells generally have a minimum thickness of 0.3 mm is made from semiconductor materials incision with positive and negative poles. Each solar cell produces usually voltage 0.5 volts. Solar cells is an active element (semiconductor) that utilizes photovoltaic effect to transform solar energy into electrical energy.
Solar cells contain a connection (junction) between two thin layers made of semiconductor materials, each of which is known as a semiconductor type “P” (positive) and semiconductor type “N” (negative).
N-type semiconductor made of silicon crystals and there are also some other materials (typically phosphorus) within the limits that these materials can provide an excess of free electrons.
Electrons are sub atomic particles are negatively charged, so that the silicon alloy in this case known as N-type semiconductor (Negative). P-type semiconductor made of silicon crystal in which there is a small amount of other material (typically boron) which caused the shortage of material free electrons. Lack or loss of electrons is called a hole. Because there is no or lack of electrons electrically negative charged then the silicon alloys in this case as a semiconductor type-P (Positive).
Composition of a solar cell, the same as a diode, consisting of two layers, called PN junction. PN junction obtained by staining a pure semiconductor silicon (valence 4) with the impurity valence 3 on the left side, and one on the right impurity stained with valence 5.
The effect of the electric field in a PV cell
Operation of a PV cell
Basic structure of a generic silicon PV cell
Thus formed on the left side that is not pure silicon again and called P type silicon, while the right side is called silicon type N. In the pure silicon there are two kinds of electrical charge carriers are balanced. Positive electric charge carriers called holes, while the negative are called electrons. After a desecration process, in the P type silicon formed holes (positive charge carriers) in a very large number compared with the electron. Therefore, in the P type silicon holes are majority charge carriers, while the electrons are minority carriers. Conversely, in the N type silicon is formed of electrons in a very large number so-called majority carriers, and holes called minority carriers.
In the silicon rod there was interaction between the P and the N. Therefore called the PN junction. When present, the P associated with the positive pole of a battery, while the negative polar associated with the N, then there is a relationship called “forward bias”.
Under forward bias, electrical currents arise in a series due to both types of charge carriers. So the electric current flowing in the PN junction is caused by the movement of electron and the movement of holes. An electric current is flowing in the direction of holes movement, but opposite direction with the movement of electrons. Just to further explain, electrons moving in the conductor material can lead to electrical energy. And electrical energy is called as an electric current that flows in the opposite direction to the movement of electrons.
But, if the P associated with negative pole of batteries and the N associated with positive pole, then now formed a relationship called “reverse bias”. In these circumstances, the hole (positive charge carriers) can be connected directly to the positive pole, while the electrons are also directly to the positive pole. So, clearly in the PN junction there is no movement of majority charge carriers either the holes or electrons. Meanwhile, the minority charge carriers (electrons) in the part P moves trying to reach the positive pole of the batteries. Similarly, the minority charge carriers (holes) in the N also moved to reach the negative pole. Therefore, in a state of reverse bias, in the PN junction there is also output current even in very small amounts (micro amperes). This current is often called the reverse saturation current or leakage current.
.
Anything interesting in reverse bias. When the temperature of PN junction raised they will be able to enlarge leakage current. Means that if given the energy (heat), the minority charge carriers in the PN junction grows. Because the light is one form of energy, so if there is light that hit a PN junction may also produce enough energy to generate charge carriers. This symptoms are called photoconductive. Based on the photoconductive symptoms made of photodiode electronic components from PN junction.
In reverse bias, with increasing intensity of light that hit photodiode can increase the level of leakage current. Leakage currents can also be enlarged by increasing the battery voltage (reverse voltage), but the addition of leakage currents were not significant. When the batteries in the reverse bias circuit is removed and replaced with a load of resistance, the provision of light that can cause charge carriers both holes and electrons. If the illumination light is increased, current output was greater. Such symptoms are called photovoltaic. Light can provide enough energy to enlarge the number of holes in the P and the number of electrons on the N. Based on the symptoms of this photovoltaic electronic components can be created photovoltaic cell. Because usually the sun as a source of light, the photovoltaic cell is also called the solar cell (solar cells) or a solar energy converter.
So the solar cell is essentially a large photo diode and designed by referring to the photovoltaic symptoms so that could produce the greatest possible power. P type silicon is the very thin surface layer so that light can penetrate directly reach the junction. Part P is given ring-shaped nickel layer, as a positive output terminal. Under the P is the N type that is coated with nickel as well as the negative output terminal.
To obtain a large enough power required much of solar cells. Usually, solar cells arranged form the shape of the panel, and is called the photovoltaic panels (PV). PV as a source of electric power was first used in satellites. Then PV as an energy source for cars, so there are solar electric car. Now, in foreign countries, PV has started to be used as a roof or wall of the house. Sanyo has made even a semi-transparent PV that can be used as a substitute for glass.
After getting the output of the solar cell is a direct electrical current can be used to load utilized. But also the electric current can be used as a charge stored by the battery to be used when needed, especially at night because there was no sun.
If the solar cell is used for storage into the battery, then the resulting voltage magnitude must be above the battery specification. For example the battery used is 12 volts, the voltage produced by solar cell must be above 12 volts in order to perform charging.
We recommend that before carrying out the charging battery should be empty because the incoming flow will be filled with the maximum. The unit capacity of a battery is the Ampere-hour (Ah) and these characteristics are usually found on the label of a battery. For example a battery with 10 Ah capacity will fill up for 10 hours with the solar cell output currents of 1 Ampere.
Utilization of solar energy in architecture can be done in two ways: passive and active. Utilization of passive do when solar power does not need to converted first into electricity. Deep utilization of the passive is also included on space heating (using the greenhouse gases) for the region with temperature of the air low, and water heating. Also, techniques to prevent heating the air in the room on the building in the area, including Tropical into the use of the passive type, where component of sunlight, which consists of: light and heat, only used on components’ light ‘it – the need for natural lighting in buildings.
Passive design strategies will be very different between the buildings that are on climate Tropical and climate Sub Tropical / cold. At the Tropical climate, direct radiation from the sun tend to be avoided by building in order to heat gain in the building to be low, so the increase of air temperature in the building can be prevented. While in Sub-Tropical climate, the design strategy is a passive step of the Tropical climate strategy in the acquisition of heat sun tend to be maximized (except in the summer), solar radiation through that fall directly on the building so that temperature increase occurs in the building, considering the air temperature around is low.
In utilizing the solar actively using the photovoltaic, should also simultaneously architect implement the strategy of passive design. Without the application of passive design strategies, energy use in buildings very likely remain high when visual and thermal comfort must be achieved. In situations such as this, the electric power comes from solar power conversion by solar cells does not become too much meaning. With dimensional solar cell panel which needs large electricity for the achievement of thermal comfort and visual on the building difficult to fulfill. Still electrical energy required for engine cooling air with a large capacity, because the air temperature in a high building, also required electricity for lights in the torch-lighting building a dark room when the strategy passive design that lead to the energy savings are not applied. Role of solar power to replace electricity necessary to achieve the building comfort (thermal and visual) finally failed because the building was not designed in such a form so that comfort achieved without the many electric energy consumption. Electricity generated by the photovoltaic possibility will not be large enough to cool down and illuminate the building. In other words passive design considerations for the use of energy in buildings in this case can not be ignored.
In the passive design, objectives of architecture work that would be achieved – that is comfortable and aesthetic, are generally made integral. Each step in the preparation of the components to form the jacket, simultaneous will result in the achievement of buildings comfort and aesthetic. Be not so with the case where the design of active solar cell panels can be arranged separate components with the preparation of building casing. In other words, the achievement of building aesthetic in active design done in a more flexible and separate with the strategy of comfort achievement, although in fact the architects are required to thought to integrate a comprehensive comfort needs with aesthetics – between needs using a solar cell panel with place them on the integrated shroud of the building so that the panels at once can be a building aesthetic element.
Article You May Be Interested In Reading: Solar Fountain
Solar Power Plant is a system of clean energy and produce electricity from sunlight. Also support the issue of global warming. Because energy is widely used by State Electricity Enterprise is the energy that can not be renewable (fossil) fuel such as kerosene, gas, coal, etc. Whereas current cost of fuel has begun to become dearer. If using the sun is free energy available abundant.
Installation and Operation is very easy, enduring long and a very inexpensive investment option to be public at this time. Can be used to meet electricity needs anywhere, especially in rural areas or areas that do not (not yet) reached by State Electricity Enterprise network.
Various Benefits of Using Solar Power Plant:
Principles of Sun Power Plant
In the daylight the solar panel receives light (rays) of the sun and then converted into electricity through the Photovoltaic. Electricity generated by solar panels can be directly channeled to burden or stored in Electric Box System (EBS), before use to load, light, radio, TV etc.
At the night, where the solar panel does not generate electricity. Electricity that has been collected (stored) in a Electric Box System (EBS) will be used. To turn on electrical equipment, especially the lighting, etc.
Components of Solar Power Plant
1. Solar Panel:
Change the sunlight into electricity. Modular form of the solar panel provides the ease of the electricity needs for various scale of the needs.
2. Electric Box System (EBS):
The Design of Solar Power Plant – The Practical and Flexible
With a flexible design that can be possible to increase the capacity of electricity with solar panels only add (maximum 2 solar panel) for each package.
Installation HOW VERY EASY
Article You May Be Interested In Reading: Solar Fountain
Solar system has a mechanical and electrical components that can convert and store electrical energy that can be used to run your home. Start the calculation that you want to do is an energy audit. You need to evaluate the amount of power that will be needed per day preferably in kilowatts / hour. So the need to consider is the location of your home. That will determine the type of solar system you need is a factor such as climate, number of days of peak sunlight per day, average rainfall and number of days of peak sunlight per year. This calculation can be done by companies that make solar electricity system, and they will guide you in choosing solar electric power systems that are appropriate for your home.
Solar electric power system consists of several components. Some of the components that you will find in the solar electric power system is a primary collector, an inverter, a circuit breaker, battery, charge controller, for collectors and mount the display panel. Collector is a component that collects the sun’s energy. In normal cases, is a solar panel collectors. Collectors on the roof is still using the cushion. Location of solar panels is very important and must be in place where the sun will fall in the maximum on it. Is the ideal place solar panels on the north-south as it will ensure that even if the sun from east to west, the panel get the sun for longer duration.
Inverter is the component that will convert the 12 volt DC power to AC power. Based on the location of the power inverter can convert the 110 volt DC to 220 volt. One of the most important component is the circuit breaker or fuse box. This component has a switch and fuse is important to set the transfer energy from the solar panel to the battery or directly to the outlets. Circuit Breakers control the amount of power that will flow to the outlet and will act as security devices for the application.
If you want to have the storage, then you need to buy one or more batteries depending on your needs. If you have then you need a battery charge controller. This component will ensure you are not over or less in charging battery that will reduce the ability of the battery.
Article You May Be Interested In Reading: Solar Hot Water
Executive Summary about Solar Electricity by Melanie Crouse
There are even tax rebates available in many states for families that are converting to home solar electricity. If you’ve been thinking of using PV (photovoltaic) panels for your home solar power, but are finding that it is too expensive, there are other options. There are many green energy suppliers that provide power from various renewable resources, such as solar electricity, wind power and hydroelectricity. If you’ve decided that solar power is the way you want to go, you will need to determine your actual power needs first.
The first thing you need to determine is how much electricity you need your home solar electricity system to generate. Do you want a grid-tied system where you are still connected to the grid, using a combination of your own solar power and the power supplied by the utility company? Or you can combine your own home solar electricity system with the grid, selling back any excess power that you don’t use to the power
Designing Solar Electricity Systems For Your Home
Executive Summary about Solar Electricity by Gary Ashby
Are you interested in designing solar electricity systems for your home? Before you build your homemade solar electricity systems, you must first consider the electrical requirements of your household as well as how much energy you wish to generate with the solar panel system.
1. Are You Comfortable Working On The Roof?
2. Is There Enough Space On Your Roof For Solar Panel Installation?
Your roof needs to have enough space for you to build sufficient solar panels on it.
3. What Happens When You Are Able To Generate More Electricity Than The Amount That Your House Requires?
4. How Exactly Do You Put a Solar Electricity System In Your Home?
Thousands of people have already eliminated their own home electricity bills with this free solar energy system that they learned how to build with a step-by-step guide online.
Article You May Be Interested In Reading: Solar Battery
