MIT Researchers in the opening of the Eni-MIT Solar Frontiers Center (SFC) that was built to promote research in advanced solar technologies has showcased a lightweight and flexible solar cell technology. This new solar cell made by using a process similar to inkjet printers. The paper used is coated paper with organic semiconductor materials.
Kyoto Institute of Technology introduced a new solar cell that can generate electricity from various sources of light or not just depends on the sun.
With this new technology, solar panels can generate electricity from sunlight, lamp light and infrared light, so it does not have to depend on the sun alone, and more flexible in its placement.
Beach Ball designed by industrial designer Tony Leung, is the concept of solar energy generating system in Abu Dhabi between Saadiyat Island and Yas Island. This system has a photovoltaic panel that is contained in the inflatable transparent latex material.
This rough camera bag is a roomy way to tote digital cameras and equipment. This is also a versatile power source suitable for remote locations! Integrated flexible solar panel 1.5W trickle charge to a 12V outlet for charging equipment. Inside, a large compartment is adjusted by adjusting the separator organizes still and / or video cameras and all the extras, while the side pockets with internal matting secure batteries, memory card and more. Features super-tough, 1680-denier nylon fabric withstands rough shoots, soft rope, and grabbed the handle, and it will charge and protect other electronics, too! The average charging time is approximately 5 hours for 2 AA batteries. [Via]
A professor at MIT, Sheila Kennedy and her team at Kennedy and Violich Architecture (KVA) recently launched SOFT Rockers at MIT 150th-anniversary Festival of Art+Science+Technology (FAST) celebration.
SOFT Rockers is a sleek, solar-powered energy recharging station, disguised as a public furniture (teardrop lounge).
OS Retractable Mobile Solar Power System (GSR-110B) is a portable power source from solar panels that can be rolled up (retractable).
With a similar shape as a screen for the projector, GSR-110B can produce up to 40 watts of power source in which the solar panel contribute 16 watts and the built-in battery 24 watts.
Eight19, a collaboration company between Cambridge University and Carbon Trust promises a cheap and flexible solar panel.
This Organic Solar PV type uses a transparent material so that when affixed to the glass will still be able to let the sun go into.
University of Southern California’s Viterbi School of Engineering has discovered a transparent, flexible and lightweight solar panel, and most important, was cheaper than any other.
If you live in apartments in high-rise buildings, and want to use renewable energy, such as wind turbine and solar cell, then Greenerator concept design is one of the solutions. The Greenerator by Jonathan Globerson can be installed on balconies and equipped with flexible solar panels and a vertical axis wind turbine. The energy generated by the system can be used to power computers or other equipment in the home. The designer believes that each unit can reduce your electric bill by 6 percent.
While many of us are just wondering about a world in which renewable energy will govern every aspect of life, the Romanian-based Shepeleff Stephen, is working on ways to make it as fresh as possible. An engineering student at Transylvania University in Brasov, Stephen imagine a world in which solar energy will make all the green gadgets. The designer has developed a Bluetooth headphones, called the Q-SOUND, which is responsible itself by using solar energy.
Konarka’s Power Plastic technology that creates a flexible thin film solar cell, now available embedded in a solar powered umbrella. SOLARBrella provide power for laptops, iPods, cell phones and other personal equipment.
Orkys, a solar powered orchid light come from Vivien Muller, the designer of eco-friendly gadgets, Photon Synthese.
Capture sunlight through flexible solar cells in the leaves, Orkys is a very interesting decorative items for the modern interior, and energy efficient way of lighting up the room.
Car bonnets, roof tiles and building facades can quickly enter the colorful and flexible solar panels to complement their conventional resources. Spheral Solar Power has produced efficient and flexible solar cells, which produces electricity at a lower cost and open an array of new applications for renewable energy.
Like denim material consists of thousands of tiny silicon beads attached to aluminum foil – each bead acting as an individual solar cells and uneven surfaces offer a larger area for light collection. Production costs can be reduced through the use of recycled silicon and this, combined with the efficiency comparable to standards photovoltaic cells and the versatility of a flexible material make Spheral solar cells potential to dramatically expand the use of renewable energy.
Building design can take advantage of hundreds of colors, styles and shapes to smoothly integrate solar cells. Spheral cells can be used to reflect light from or transmit light into the building and expand their flexibility for use in the company logo.
In tile the cells can be incorporated into the curved substrate opening various markets applications and automobile manufacturer may have found an alternative aerodynamic to rigid photovoltaic cells that are not practical in terms of vehicle design.
Commercial production of flexible cells are expected to begin in late 2003.
Adventures in microsolar supported by microelectronics and MEMS techniques
Representative thin crystalline-silicon photovoltaic cells – these are from 14 to 20 micrometers thick and 0.25 to 1 millimeter across.
Sandia National Laboratories scientists have developed tiny glitter-sized photovoltaic cells that could revolutionize the way solar energy is collected and used.
The tiny cells could turn a person into a walking solar battery charger if they were fastened to flexible substrates molded around unusual shapes, such as clothing.
The solar particles, fabricated of crystalline silicon, hold the potential for a variety of new applications. They are expected eventually to be less expensive and have greater efficiencies than current photovoltaic collectors that are pieced together with 6-inch- square solar wafers.
The cells are fabricated using microelectronic and microelectromechanical systems (MEMS) techniques common to today’s electronic foundries.
Sandia lead investigator Greg Nielson said the research team has identified more than 20 benefits of scale for its microphotovoltaic cells. These include new applications, improved performance, potential for reduced costs and higher efficiencies.
“Eventually units could be mass-produced and wrapped around unusual shapes for building-integrated solar, tents and maybe even clothing,” he said. This would make it possible for hunters, hikers or military personnel in the field to recharge batteries for phones, cameras and other electronic devices as they walk or rest.
Sandia project lead Greg Nielson holds a solar cell test prototype with a microscale lens array fastened above it. Together, the cell and lens help create a concentrated photovoltaic unit.
Even better, such microengineered panels could have circuits imprinted that would help perform other functions customarily left to large-scale construction with its attendant need for field construction design and permits.
Said Sandia field engineer Vipin Gupta, “Photovoltaic modules made from these microsized cells for the rooftops of homes and warehouses could have intelligent controls, inverters and even storage built in at the chip level. Such an integrated module could greatly simplify the cumbersome design, bid, permit and grid integration process that our solar technical assistance teams see in the field all the time.”
For large-scale power generation, said Sandia researcher Murat Okandan, “One of the biggest scale benefits is a significant reduction in manufacturing and installation costs compared with current PV techniques.”
Part of the potential cost reduction comes about because microcells require relatively little material to form well-controlled and highly efficient devices.
From 14 to 20 micrometers thick (a human hair is approximately 70 micrometers thick), they are 10 times thinner than conventional 6-inch-by-6-inch brick-sized cells, yet perform at about the same efficiency.
100 times less silicon generates same amount of electricity
“So they use 100 times less silicon to generate the same amount of electricity,” said Okandan. “Since they are much smaller and have fewer mechanical deformations for a given environment than the conventional cells, they may also be more reliable over the long term.”
Another manufacturing convenience is that the cells, because they are only hundreds of micrometers in diameter, can be fabricated from commercial wafers of any size, including today’s 300-millimeter (12-inch) diameter wafers and future 450-millimeter (18-inch) wafers. Further, if one cell proves defective in manufacture, the rest still can be harvested, while if a brick-sized unit goes bad, the entire wafer may be unusable. Also, brick-sized units fabricated larger than the conventional 6-inch-by-6-inch cross section to take advantage of larger wafer size would require thicker power lines to harvest the increased power, creating more cost and possibly shading the wafer. That problem does not exist with the small-cell approach and its individualized wiring.
From left to right, Sandia researchers Murat OKandan, Greg Nielson, and Jose Luis Cruz-Campa, hold samples containing arrays of microsolar cells.
Other unique features are available because the cells are so small. “The shade tolerance of our units to overhead obstructions is better than conventional PV panels,” said Nielson, “because portions of our units not in shade will keep sending out electricity where a partially shaded conventional panel may turn off entirely.”
Because flexible substrates can be easily fabricated, high-efficiency PV for ubiquitous solar power becomes more feasible, said Okandan.
A commercial move to microscale PV cells would be a dramatic change from conventional silicon PV modules composed of arrays of 6-inch-by-6-inch wafers. However, by bringing in techniques normally used in MEMS, electronics and the light-emitting diode (LED) industries (for additional work involving gallium arsenide instead of silicon), the change to small cells should be relatively straightforward, Gupta said.
Each cell is formed on silicon wafers, etched and then released inexpensively in hexagonal shapes, with electrical contacts prefabricated on each piece, by borrowing techniques from integrated circuits and MEMS.
Offering a run for their money to conventional large wafers of crystalline silicon, electricity presently can be harvested from the Sandia-created cells with 14.9 percent efficiency. Off-the-shelf commercial modules range from 13 to 20 percent efficient.
A widely used commercial tool called a pick-and-place machine — the current standard for the mass assembly of electronics — can place up to 130,000 pieces of glitter per hour at electrical contact points preestablished on the substrate; the placement takes place at cooler temperatures. The cost is approximately one-tenth of a cent per piece with the number of cells per module determined by the level of optical concentration and the size of the die, likely to be in the 10,000 to 50,000 cell per square meter range. An alternate technology, still at the lab-bench stage, involves self-assembly of the parts at even lower costs.
Solar concentrators — low-cost, prefabricated, optically efficient microlens arrays — can be placed directly over each glitter-sized cell to increase the number of photons arriving to be converted via the photovoltaic effect into electrons. The small cell size means that cheaper and more efficient short focal length microlens arrays can be fabricated for this purpose.
High-voltage output is possible directly from the modules because of the large number of cells in the array. This should reduce costs associated with wiring, due to reduced resistive losses at higher voltages.
Other possible applications for the technology include satellites and remote sensing.
The project combines expertise from Sandia’s Microsystems Center; Photovoltaics and Grid Integration Group; the Materials, Devices, and Energy Technologies Group; and the National Renewable Energy Lab’s Concentrating Photovoltaics Group.
Involved in the process, in addition to Nielson, Okandan and Gupta, are Jose Luis Cruz-Campa, Paul Resnick, Tammy Pluym, Peggy Clews, Carlos Sanchez, Bill Sweatt, Tony Lentine, Anton Filatov, Mike Sinclair, Mark Overberg, Jeff Nelson, Jennifer Granata, Craig Carmignani, Rick Kemp, Connie Stewart, Jonathan Wierer,
George Wang, Jerry Simmons, Jason Strauch, Judith Lavin and Mark Wanlass (NREL).
The work is supported by DOE’s Solar Energy Technology Program and Sandia’s Laboratory Directed Research & Development program, and has been presented at four technical conferences this year.
The ability of light to produce electrons, and thus electricity, has been known for more than a hundred years.
Solar technologies is now highly developed, with some progress is being developed to be used every day.
Below 10 Solar Technologies to note:
