Space Solar Power
Space Solar Power System
Like the story of a fictional movie, but Japanese space agency plan so serious: In 2030 they will capture solar energy in space and sends it to Earth via laser or microwave.
Search Results
Solar Power Plant
Top 5 World’s Largest Solar Power Plants
1. Olmedilla Park Solar Power Plant
(in Olmedilla de Alarcón, Spain, 60 MW) Finished in September 2008. This power plant uses 162,000 average photovoltaic solar panel to deliver 60 MW of electricity on a sunny day. The whole factory was completed in 15 months at a cost of about 530 million U.S. dollars current exchange rate. Olmedilla built with conventional solar panels, which are made with silicon and tend to heavy and expensive.
2. Puertollano Park Solar Power Plant
(Spain, 50 MW) in 2008 Renovalia develop the power station in Puertollano, Ciudad Real, residential energy parks with an installed capacity of 50 megawatts (MW). The power generated here is equivalent to the annual domestic consumption of electricity of about 39,000 households. The energy produced here will replace the theoretical disposal 84,000 tons CO2/year or 2.1 million tons of CO2 over 25 years during the production.
3. Moura Solar Power Station
(Portugal, 46 MW) Completed December 2008. This solar power plant is placed in the municipality of Moura, Alentejo, Portugal, one of the sunniest areas in Europe and besides one of the most economically depressed. The construction involves two stages, first with a built in 13 months and completed in 2008, and the rest will be completed in 2010, with a total cost of € 250 million for the project. The power plant will have an installed capacity of 46 mwp, by more than 376,000 solar panels. Nearly 190,000 panels (32 MW) installed in permanent structures, 52,000 (10 MW) in a single-axis trackers, which follow the sun in the sky, and further 20 MW of power capacity will be added during phase 2 project. This will occupy an area of 320 hectares (130 acres), producing 88 GWh of electricity per year.
4. Waldpolenz Solar Park
(Germany, 40 MW) 550,000 First Solar thin-film CdTe modules. Completed in December 2008 Waldpolenz Solar Park, which is the world’s largest thin-film photovoltaic (PV) power system, built at a military air base east of Leipzig in Germany. The power plant 40-megawatt solar power system using state-of-the-art thin film technology. 550,000 First Solar thin film modules are used, which supplies 40,000 MWh of electricity per year. The investment costs for solar parks Waldpolenz Euro 130 million.
5. Arnedo Solar Plant
(Spain, 36 MW). Completed in October 2008, power plant that produces 34 GWh per year, which would own 12,000 households and prevent 375,000 tons of CO2. Facilities in seven acres and 172,000 panels houses. Project budget of about € 180,000,000. La Rioja, a region of Spain known for its wine, already covers 62% of electricity with enhanced resources.
Incoming search terms for the article:
Waldpolenz Solar Park (54), Waldpolenz Solarpark (35), solar parks (33), Puertollano Photovoltaic Park (26), solar park (25), Olmedilla Photovoltaic Park (19), Solar power plant (18), solar power plants (14), Arnedo Solar Plant (13), olmedilla photovoltaic park area (13), moura portugal (11), Moura Photovoltaic Power Station (6), photovoltaic park (4), olmedilla photovoltaic park spain (2), Waldpolenz Solar Park Germany (1), puertollano solarpark (1), pv plant (1), recommendation oabout solar power plant (1), renovalia energy Puertollano (1), solar energy power plant (1)Solar Cell
What Does Solar Cell Mean?
You may have seen a calculator that has a solar cell? calculator that does not need batteries, and in some cases do not even have the off button. As long as you have enough light, so the calculator can be on at any time and forever. You may have seen larger solar panels, such as in housing or traffic lights, haven’t you? In this article I will review how solar cell work so it can deliver the energy and drive an electronic device.
Today the demand for electricity has become a major requirement in all corners. The presence of power plants sometimes do not solve the need for electricity especially in remote areas where the terrain is always an excuse. Here an alternative energy that can be easily found in nature and can be used as an alternative free energy replacing conventional electricity, because it can turn on household electronics such as televisions, radios and lights.
Solar cells made from pieces of a very small silicon coated with special chemicals to form the basis of solar cells. Solar cells generally have a minimum thickness of 0.3 mm is made from semiconductor materials incision with positive and negative poles. Each solar cell produces usually voltage 0.5 volts. Solar cells is an active element (semiconductor) that utilizes photovoltaic effect to transform solar energy into electrical energy.
Solar cells contain a connection (junction) between two thin layers made of semiconductor materials, each of which is known as a semiconductor type “P” (positive) and semiconductor type “N” (negative).
N-type semiconductor made of silicon crystals and there are also some other materials (typically phosphorus) within the limits that these materials can provide an excess of free electrons.
Electrons are sub atomic particles are negatively charged, so that the silicon alloy in this case known as N-type semiconductor (Negative). P-type semiconductor made of silicon crystal in which there is a small amount of other material (typically boron) which caused the shortage of material free electrons. Lack or loss of electrons is called a hole. Because there is no or lack of electrons electrically negative charged then the silicon alloys in this case as a semiconductor type-P (Positive).
Composition of a solar cell, the same as a diode, consisting of two layers, called PN junction. PN junction obtained by staining a pure semiconductor silicon (valence 4) with the impurity valence 3 on the left side, and one on the right impurity stained with valence 5.
The effect of the electric field in a PV cell
Operation of a PV cell
Basic structure of a generic silicon PV cell
Thus formed on the left side that is not pure silicon again and called P type silicon, while the right side is called silicon type N. In the pure silicon there are two kinds of electrical charge carriers are balanced. Positive electric charge carriers called holes, while the negative are called electrons. After a desecration process, in the P type silicon formed holes (positive charge carriers) in a very large number compared with the electron. Therefore, in the P type silicon holes are majority charge carriers, while the electrons are minority carriers. Conversely, in the N type silicon is formed of electrons in a very large number so-called majority carriers, and holes called minority carriers.
In the silicon rod there was interaction between the P and the N. Therefore called the PN junction. When present, the P associated with the positive pole of a battery, while the negative polar associated with the N, then there is a relationship called “forward bias”.
Under forward bias, electrical currents arise in a series due to both types of charge carriers. So the electric current flowing in the PN junction is caused by the movement of electron and the movement of holes. An electric current is flowing in the direction of holes movement, but opposite direction with the movement of electrons. Just to further explain, electrons moving in the conductor material can lead to electrical energy. And electrical energy is called as an electric current that flows in the opposite direction to the movement of electrons.
But, if the P associated with negative pole of batteries and the N associated with positive pole, then now formed a relationship called “reverse bias”. In these circumstances, the hole (positive charge carriers) can be connected directly to the positive pole, while the electrons are also directly to the positive pole. So, clearly in the PN junction there is no movement of majority charge carriers either the holes or electrons. Meanwhile, the minority charge carriers (electrons) in the part P moves trying to reach the positive pole of the batteries. Similarly, the minority charge carriers (holes) in the N also moved to reach the negative pole. Therefore, in a state of reverse bias, in the PN junction there is also output current even in very small amounts (micro amperes). This current is often called the reverse saturation current or leakage current.
.
Anything interesting in reverse bias. When the temperature of PN junction raised they will be able to enlarge leakage current. Means that if given the energy (heat), the minority charge carriers in the PN junction grows. Because the light is one form of energy, so if there is light that hit a PN junction may also produce enough energy to generate charge carriers. This symptoms are called photoconductive. Based on the photoconductive symptoms made of photodiode electronic components from PN junction.
In reverse bias, with increasing intensity of light that hit photodiode can increase the level of leakage current. Leakage currents can also be enlarged by increasing the battery voltage (reverse voltage), but the addition of leakage currents were not significant. When the batteries in the reverse bias circuit is removed and replaced with a load of resistance, the provision of light that can cause charge carriers both holes and electrons. If the illumination light is increased, current output was greater. Such symptoms are called photovoltaic. Light can provide enough energy to enlarge the number of holes in the P and the number of electrons on the N. Based on the symptoms of this photovoltaic electronic components can be created photovoltaic cell. Because usually the sun as a source of light, the photovoltaic cell is also called the solar cell (solar cells) or a solar energy converter.
So the solar cell is essentially a large photo diode and designed by referring to the photovoltaic symptoms so that could produce the greatest possible power. P type silicon is the very thin surface layer so that light can penetrate directly reach the junction. Part P is given ring-shaped nickel layer, as a positive output terminal. Under the P is the N type that is coated with nickel as well as the negative output terminal.
To obtain a large enough power required much of solar cells. Usually, solar cells arranged form the shape of the panel, and is called the photovoltaic panels (PV). PV as a source of electric power was first used in satellites. Then PV as an energy source for cars, so there are solar electric car. Now, in foreign countries, PV has started to be used as a roof or wall of the house. Sanyo has made even a semi-transparent PV that can be used as a substitute for glass.
After getting the output of the solar cell is a direct electrical current can be used to load utilized. But also the electric current can be used as a charge stored by the battery to be used when needed, especially at night because there was no sun.
If the solar cell is used for storage into the battery, then the resulting voltage magnitude must be above the battery specification. For example the battery used is 12 volts, the voltage produced by solar cell must be above 12 volts in order to perform charging.
We recommend that before carrying out the charging battery should be empty because the incoming flow will be filled with the maximum. The unit capacity of a battery is the Ampere-hour (Ah) and these characteristics are usually found on the label of a battery. For example a battery with 10 Ah capacity will fill up for 10 hours with the solar cell output currents of 1 Ampere.
