December 21, 2009
By: Admin
Category: Solar Cells
Glitter-sized Solar Photovoltaics Produce Competitive Results
Adventures in microsolar supported by microelectronics and MEMS techniques
Representative thin crystalline-silicon photovoltaic cells – these are from 14 to 20 micrometers thick and 0.25 to 1 millimeter across.
Sandia National Laboratories scientists have developed tiny glitter-sized photovoltaic cells that could revolutionize the way solar energy is collected and used.
The tiny cells could turn a person into a walking solar battery charger if they were fastened to flexible substrates molded around unusual shapes, such as clothing.
The solar particles, fabricated of crystalline silicon, hold the potential for a variety of new applications. They are expected eventually to be less expensive and have greater efficiencies than current photovoltaic collectors that are pieced together with 6-inch- square solar wafers.
The cells are fabricated using microelectronic and microelectromechanical systems (MEMS) techniques common to today’s electronic foundries.
Sandia lead investigator Greg Nielson said the research team has identified more than 20 benefits of scale for its microphotovoltaic cells. These include new applications, improved performance, potential for reduced costs and higher efficiencies.
“Eventually units could be mass-produced and wrapped around unusual shapes for building-integrated solar, tents and maybe even clothing,” he said. This would make it possible for hunters, hikers or military personnel in the field to recharge batteries for phones, cameras and other electronic devices as they walk or rest.
Sandia project lead Greg Nielson holds a solar cell test prototype with a microscale lens array fastened above it. Together, the cell and lens help create a concentrated photovoltaic unit.
Even better, such microengineered panels could have circuits imprinted that would help perform other functions customarily left to large-scale construction with its attendant need for field construction design and permits.
Said Sandia field engineer Vipin Gupta, “Photovoltaic modules made from these microsized cells for the rooftops of homes and warehouses could have intelligent controls, inverters and even storage built in at the chip level. Such an integrated module could greatly simplify the cumbersome design, bid, permit and grid integration process that our solar technical assistance teams see in the field all the time.”
For large-scale power generation, said Sandia researcher Murat Okandan, “One of the biggest scale benefits is a significant reduction in manufacturing and installation costs compared with current PV techniques.”
Part of the potential cost reduction comes about because microcells require relatively little material to form well-controlled and highly efficient devices.
From 14 to 20 micrometers thick (a human hair is approximately 70 micrometers thick), they are 10 times thinner than conventional 6-inch-by-6-inch brick-sized cells, yet perform at about the same efficiency.
100 times less silicon generates same amount of electricity
“So they use 100 times less silicon to generate the same amount of electricity,” said Okandan. “Since they are much smaller and have fewer mechanical deformations for a given environment than the conventional cells, they may also be more reliable over the long term.”
Another manufacturing convenience is that the cells, because they are only hundreds of micrometers in diameter, can be fabricated from commercial wafers of any size, including today’s 300-millimeter (12-inch) diameter wafers and future 450-millimeter (18-inch) wafers. Further, if one cell proves defective in manufacture, the rest still can be harvested, while if a brick-sized unit goes bad, the entire wafer may be unusable. Also, brick-sized units fabricated larger than the conventional 6-inch-by-6-inch cross section to take advantage of larger wafer size would require thicker power lines to harvest the increased power, creating more cost and possibly shading the wafer. That problem does not exist with the small-cell approach and its individualized wiring.
From left to right, Sandia researchers Murat OKandan, Greg Nielson, and Jose Luis Cruz-Campa, hold samples containing arrays of microsolar cells.
Other unique features are available because the cells are so small. “The shade tolerance of our units to overhead obstructions is better than conventional PV panels,” said Nielson, “because portions of our units not in shade will keep sending out electricity where a partially shaded conventional panel may turn off entirely.”
Because flexible substrates can be easily fabricated, high-efficiency PV for ubiquitous solar power becomes more feasible, said Okandan.
A commercial move to microscale PV cells would be a dramatic change from conventional silicon PV modules composed of arrays of 6-inch-by-6-inch wafers. However, by bringing in techniques normally used in MEMS, electronics and the light-emitting diode (LED) industries (for additional work involving gallium arsenide instead of silicon), the change to small cells should be relatively straightforward, Gupta said.
Each cell is formed on silicon wafers, etched and then released inexpensively in hexagonal shapes, with electrical contacts prefabricated on each piece, by borrowing techniques from integrated circuits and MEMS.
Offering a run for their money to conventional large wafers of crystalline silicon, electricity presently can be harvested from the Sandia-created cells with 14.9 percent efficiency. Off-the-shelf commercial modules range from 13 to 20 percent efficient.
A widely used commercial tool called a pick-and-place machine — the current standard for the mass assembly of electronics — can place up to 130,000 pieces of glitter per hour at electrical contact points preestablished on the substrate; the placement takes place at cooler temperatures. The cost is approximately one-tenth of a cent per piece with the number of cells per module determined by the level of optical concentration and the size of the die, likely to be in the 10,000 to 50,000 cell per square meter range. An alternate technology, still at the lab-bench stage, involves self-assembly of the parts at even lower costs.
Solar concentrators — low-cost, prefabricated, optically efficient microlens arrays — can be placed directly over each glitter-sized cell to increase the number of photons arriving to be converted via the photovoltaic effect into electrons. The small cell size means that cheaper and more efficient short focal length microlens arrays can be fabricated for this purpose.
High-voltage output is possible directly from the modules because of the large number of cells in the array. This should reduce costs associated with wiring, due to reduced resistive losses at higher voltages.
Other possible applications for the technology include satellites and remote sensing.
The project combines expertise from Sandia’s Microsystems Center; Photovoltaics and Grid Integration Group; the Materials, Devices, and Energy Technologies Group; and the National Renewable Energy Lab’s Concentrating Photovoltaics Group.
Involved in the process, in addition to Nielson, Okandan and Gupta, are Jose Luis Cruz-Campa, Paul Resnick, Tammy Pluym, Peggy Clews, Carlos Sanchez, Bill Sweatt, Tony Lentine, Anton Filatov, Mike Sinclair, Mark Overberg, Jeff Nelson, Jennifer Granata, Craig Carmignani, Rick Kemp, Connie Stewart, Jonathan Wierer,
George Wang, Jerry Simmons, Jason Strauch, Judith Lavin and Mark Wanlass (NREL).
The work is supported by DOE’s Solar Energy Technology Program and Sandia’s Laboratory Directed Research & Development program, and has been presented at four technical conferences this year.
The ability of light to produce electrons, and thus electricity, has been known for more than a hundred years.
[Via]
Incoming search terms for the article:
photovoltaics sale (34),
photovoltaics for sale (12),
photovoltaic cells for sale (11),
light concentrators (1),
Photovoltaic (PV) cell on sale (1),
photovoltaic cell (1),
Powered by Article Dashboard a 10 gallon freshwater aquarium (1)
Comments (8)
November 26, 2009
By: Admin
Category: Solar Light
Solar Light Tubes
Initial concept of light tubes developed by the ancient Egyptians, namely by direct use of natural light tubes with reflective material. This is the concept of the oldest and most widespread type of natural lighting of interior space.
Light tubes are also known as “tubular skylight”, “SunScope” or “Tubular Daylighting Device” allow natural light into the darkened interior room of buildings and houses. The people enjoy the natural lighting provided by skylights. However, skylights are often not evenly distribute the light, is the loss of a significant source of energy, and UV light can cause damage to the carpet and furniture. Light tubes, on the other hand, using the sun for lighting interiors without the shortcomings associated with conventional skylights. To prevent the danger of ultraviolet radiation (UV) from the carpet and furniture fading, UV inhibitors formed a dome roof on most models. Another bonus when choosing light tubes is that they provide far more heat slightly, as did the standard skylights. Because of the lack of acceptance of this heat, tubular skylights to save money on air conditioning bills during hot months.
Taking advantage of free sunlight as much as possible, the pipe hole collect sunlight from the roof dome light collector consists of an acrylic lens, bounce it to the bottom of a tube with a highly reflective interior coating, to pull the lens cap is similar to conventional recessed lighting equipment and diffuse sun light evenly throughout the interior rooms. The tube can be bent and adapted to drive around the garret or ceiling obstructions with small loss of light transmitting and can often be installed in less than three hours. Not like the ceiling of need roof to the ceiling of the timber-framed shaft and covered with drywall or wood panels, and the need for structural modifications, so installation is simple and relatively inexpensive.
Roof mounted dome made of high quality acrylic resin specially formulated to enhance the impact strength, chemical, weather resistance and high clarity.
Light tubes can be installed on almost all types of roof materials, including wood and asphalt shingles, concrete and ceramics, and metals. Thanks to a highly reflective coating on the rod, the tube can work efficiently from sunrise to sunset.
Most of the producers of glass tubular solar roof offers a 10-year warranty against defects in materials and post-installation cracks or discoloration. Tubes solar installation contractors generally offer a 2-3 year warranty for the installation of weatherproofing and storm protection.
The average size of the tubular skylight ranges between 10 and 21 inches (254 and 533 mm), diameter, which effectively light of 100-600 square feet (30,48-182,88 meters), interior space. The main factor in choosing a general measure of the distance between the roof rafters and / or ceiling beams.
Prices range from around $ 171.00 to $ 423.00. Installing a solar tube usually cost between $ 500 and $ 800. Both depend on the size of tubes and features installed.
Light tube options include:
- Dimmers which allows the natural lighting level of a room that will turn up or down according to demand.
- Light kit for night time lighting.
- Ventilation fan kit
Energy-efficient light tubes is an important part of the house and environmentally friendly buildings. Natural light effects on your physical, emotional and psychological well known as the rooms benefit from natural sunlight free will positively impact our environment for future generations. They are environmentally-friendly way to naturally brighten every room, a smart alternative to skylights and artificial lighting.
Incoming search terms for the article:
Powered by Article Dashboard pot psychology (2),
Powered by Article Dashboard advantages and disadvantages for intensive farming (1),
skylight ppt (1),
Powered by Article Dashboard pot (1),
Powered by Article Dashboard physical science physics friction (1),
Powered by Article Dashboard nano reef aquarium set ups (1),
Powered by Article Dashboard mosaic art projects (1),
Powered by Article Dashboard egyptian christmas decorations (1),
Powered by Article Dashboard brighton tourist information (1),
Powered by Article Dashboard basic physics of fluids (1),
Powered by Article Dashboard another meaning for holding tank (1),
solar tubes (1)
Comment (1)
