Flexible Solar Cell by Spheral Solar Power
Car bonnets, roof tiles and building facades can quickly enter the colorful and flexible solar panels to complement their conventional resources. Spheral Solar Power has produced efficient and flexible solar cells, which produces electricity at a lower cost and open an array of new applications for renewable energy.
Like denim material consists of thousands of tiny silicon beads attached to aluminum foil – each bead acting as an individual solar cells and uneven surfaces offer a larger area for light collection. Production costs can be reduced through the use of recycled silicon and this, combined with the efficiency comparable to standards photovoltaic cells and the versatility of a flexible material make Spheral solar cells potential to dramatically expand the use of renewable energy.
Building design can take advantage of hundreds of colors, styles and shapes to smoothly integrate solar cells. Spheral cells can be used to reflect light from or transmit light into the building and expand their flexibility for use in the company logo.
In tile the cells can be incorporated into the curved substrate opening various markets applications and automobile manufacturer may have found an alternative aerodynamic to rigid photovoltaic cells that are not practical in terms of vehicle design.
Commercial production of flexible cells are expected to begin in late 2003.
Incoming search terms for the article:a device that concentrate solar light on one spot
(1), iphone 5 solar panel
(1), roof light cell
(1), solar iphone case
Solar Panel Installation – How to Do It
Executive Summary about Solar Installation by Gio Rigt
Make sure you choose the perfect location for you solar panels. Nothing should block the solar panel from receiving sunlight. A little bit of shadow blocking the panels reduces the amount of energy the solar panel produces tremendously.
Place the posts first and attach metal rails to the posts on your roof. Attach solar panel mounts to the solar panels, the roof-ground mounts will suffice.
After installing the solar panels, connect them to the inverter. When it comes to inverters, the synchronous solar panel inverter is the best affordable choice.
The solar energy is stored in a battery, excess energy is sold back to the utility company. If there ever is a situation where you do not have enough energy for your house, the utility company will supply the energy through the solar panel converter.
You are done with your solar panel installation.
Solar Panels – Professional Installation Vs Do-It-Yourself
Executive Summary about Solar Installation by Tina Metcalf
There is a product available on the internet called Earth for Energy. For about $40, they will send you a PDF or Adobe file with information on how to make or build your own energy efficient green devices.
Supposedly, for a fraction of the retail costs, someone should be able to construct windmills, solar cell panels and other green related things to either augment your electrical consumption, or ultimately, get yourself off the grid completely. Thinking efficiency all around, it would be so much easier, and in the long run cost effective, to find reputable dealers that build and manufacture green technology, like solar cell panels. My thought is this; go with a local solar installer (like Cooler Planet), let them sweat the details, add on a little at a time as your budget allows, and enjoy your life.
Article You May Be Interested In Reading: Charger Solar
Incoming search terms for the article:greg neilson solar 2013
Solar Charger Vest for Portable Electronics
Solar Vest CVFR-S09 is designed for your comfort and convenience. It comes with a large storage pockets to store tools or equipment including cameras and batteries + cables and connectors for all currently popular portable electronic. Canvas vest is soft but durable.
Vest that consists of 4 laminated solar panels to be completely weatherproof, so you do not need to change this vest just because of bad weather. You also may remove the solar panels and placing them in the sun while you work in a cave or a shaded field.
As you walk outside, the four solar panels on the back of the vest absorbs solar energy and store it in a high-capacity battery is located in the front left pocket. If your phone or other gadgets need power, just plug it into the battery and allow it charged. Simple as that!
The Solar Vest – Solar Battery + Charger for Portable Electronics is available at Chinavasion website. The price offered about $ 140 USD.
Incoming search terms for the article:solar phone charger
(2), solar things with one base charger bluetooth to many
New Solar Technology
Solar technologies is now highly developed, with some progress is being developed to be used every day.
Below 10 Solar Technologies to note:
- Water Heating Solar Panel: Pyron Solar Triad uses a special design, short focal-length, lens in the acrylic concentration to reflect and accept the light, effectively concentrate 6.500 solar power in the form of a small light. The second lens capture light and focus on PV cells. According to related companies, HE Optics System produces 800 times more energy than the silicon solar cells.
- Home Solar to Hydrogen Storage: An MIT professor Daniel Nocera, build a company this year to market a technology that can split water and store solar energy. The key of this company is to achieve a breakthrough solar energy to make solar power cheaper.
“The idea is to use solar panels to power the electrolyzer to produce hydrogen which would be stored in tanks. When people need electricity, the stored hydrogen would put through a fuel cell.”
- Solar panel roof that can be printed and painted: If solar power is easy to install as to paint your roof with sunlight resistant paint, it will lower the standard for the installation of solar power at home. This technology called silicon ink, and according to the U.S. National Renewable Energy Laboratory, solar cells showed 18% energy savings.
- Large Panel Solar Film: SunFab ™ system uses silicon thin film technology to market the largest and most powerful panels in the world and combines inexpensive material.
- Organic Solar Concentrators: Engineers at MIT have created a method to transform glass into a high-tech solar concentrator, using color glass to collect and emit light which is usually missing from the panel surface. This technology can create a building for use with glass window film to gather strength. Other companies, GreenSun, has developed a panel of light color where it catch the other parts of the spectrum of the sun, and does not require direct sunlight to work.
- Space Based Solar: Japanese are developing a giant space station with solar power generators to transmit solar power to earth from 36.000 km above the earth within the next 30 years. The Japanese Government supports $ 21 billion project, which includes a space station solar power with solar panels cubical 4km, save electric energy of 1 gigawatt, enough for 300,000 homes in Tokyo.
- Solar Roads: Solar Roadways concept, will make a way to use glass panels to collect and distribute solar energy to illuminate the light at night and hot in winter, with enough remaining energy to light homes and businesses. Discoverer, Scott Brusaw, estimating each mile of solar panels can be illuminated 500 houses, and is expected to make a panel for 12×12 need cost about $ 5,000.
- SunCatcher: Stirling Energy System, contains a solar concentrator in the bowl structure supported by a convex mirror, can be used in Arizona soon. SunCatcher using glass system fitted with a parabolic bowl for concentrating solar power in high-efficiency Stirling engine, with each bowl produces 25.000 watts.
- Solar Nanotechnology: Research workers at McMaster University in Ontario has developed a light-absorbing nanowires formed of excellent photovoltaic materials in thin but durable carbon-nanotube fabric. They also use small particles in a flexible polyster film where can lead to solar cells that are both flexible and cheaper than today’s solar cells.
- Grid Ready for Solar: Andalay AC solar energy panels, made with Akeena Solar technology, integrate the racking, wiring and electrical grounding components to the panel. According to the company, this will against the damage, a lot of money in saving for 30 year lifetime. Andalay AC solar energy panels produce a safe AC power, and can be a safe installation process for users.
Incoming search terms for the article:can solar powered lights be placed inside window to use
(1), Energy have ebs increased there bills
(1), horizontal solar light tubes
(1), how to build parabolic solar concentrator to yield 500 degrees celsius
(1), pictures of saving electricity through solar system
(1), pyron solar triad
(1), With solar installation at an increase how would solar gadgets work when there is no sun at night or when the day is cloudy or rainy?
Solar Mobile Home by Mehdi Hidari Badie
The concept of Solar Powered Mobile Home by Mehdi Hidari Badie can be a solution for those of you who do not have land to build a house. At least, it can be used to save the land.
Development standards and with consideration of a permanent home, the concept of this solar mobile home is made with a combination of steel, aluminum, recycled plastic, and thermoplastic insulation. So although frequently folded and opened, you do not have to worry about the corrosion. The roof has several solar panels that fold out when setting up home, so always be running on, and store solar energy.
Read the rest of this entry »
Incoming search terms for the article:Powered by Article Dashboard conceptual physics summary illustrations
(22), Powered by Article Dashboard fun physics experiments thermal energy transfer
(21), Powered by Article Dashboard rock candy science experiment
(18), Powered by Article Dashboard astronomy picture of the day august 7 2007
(14), Powered by Article Dashboard fm radio waves
(11), Powered by Article Dashboard gr 11 university physics vibrations and waves
(10), mobile home SOLAR
(2), solar panels for mobile homes
(1), solar powered mobile home
(1), solar powered mobile homes
(1), mobel home solar powered
(1), solar panals mobile home
(1), solar model mobile home
(1), solar mobile homes
(1), solar mobile home lights
(1), Solar mobile home
(1), mobile home solar power
Things You Should Know About Solar Kits
One of the answers to the energy crisis is to apply solar power. Solar power is the energy source of the most powerful and freely available to us now. That is why production of solar energy kits more abundant.
Solar energy kits is slowly taking place in most of the different houses in the world. Householders feel easy, convenient and effective to obtain energy from the sunlight.
Read the rest of this entry »
Incoming search terms for the article:solar kits
(23), Powered by Article Dashboard army general discharge
(18), save electricity to avoid power cuts
Home Sweet Solar Home – Making Homes Better With Solar Technology
Executive Summary about Solar Home by Anne Clarke
By now many people know it is possible to generate energy without the use of dwindling traditional resources. This stimulated atmospheric cycle is the product of a solar biosphere that remains in constant, gradual motion. You can draw energy directly from the sunlight, you can save money on energy costs, and you can be a big part of the effort to protect our planet. Remember, though, solar panels are not the only type of solar technology available that can harvest a decent alternative to electricity from the sun. There are wind turbines, solar panels, biospheres, and many other innovative solar power mechanisms that have made headway in an extreme scientific objective to help protect the earth. Despite what many people might believe, there are solar solutions available as alternative energy sources that virtually anyone can choose over electrical energy. Soon construction companies for homes, office buildings, apartment complexes, and more will adopt new methods of design that will dovetail more easily with solar technology.
Read the rest of this entry »
Incoming search terms for the article:roof
(25), Solar power tree
(23), solar cell house
(18), Powered by Article Dashboard solar hot water heater systems
(14), solar roof
(13), Powered by Article Dashboard do you need a filter in a reef aquarium
(13), solar panel roof
(12), solar powered house
(11), Powered by Article Dashboard gardening tools portland oregon
(10), solar homes
(10), altering micro-climate of house
Solar Energy Applications
Solar energy technologies use energy from the sun to produce heat, light, hot water, electricity, and even cooling, for homes, commercial and industrial.
There are a variety of technological applications that have been developed to take advantage of solar energy. Technology can be read further below.
Solar cells work by converting sunlight directly into electricity. The electrons in the semiconductor material, the material used to capture sunlight, will move when the sun’s energy in the form of photons hit it. Solar energy is forcing the electrons to move, occur continuously, and consequently there is also a continuous electricity production. Process, which turns sunlight (photons) into electricity (voltage), called the photovoltaic effect.
Solar Cell Module
Solar cells are usually organized into modules that each module can consist of 40 solar cells. Some modules can be arranged to form a PV line fitted with a fixed angle facing south. Or even could be placed in a sun-tracking device, to get more solar energy throughout the day. Several rows of PV could produce enough power for a house. As for industrial applications or power companies, hundreds of lines of PV can be linked to form one large PV systems and sufficient to meet the electricity needs.
Thin Film Solar Cell
Thin film solar cells use several layers of semiconductor material with a thickness in the micrometer scale. Technology allows to create solar cells integrated into rooftops to the skylights. Even solar cells are designed for applications having the same power with actual roof.
Read the rest of this entry »
Incoming search terms for the article:Powered by Article Dashboard electricity voltage current resistance high school physics
Samsung Be Concept by Tommaso Gecchelin
A product design is not just an isolated object, but also the complex network of relationships that constitute it for what it will be understood in context. This work wants to build a network of environmental sustainability and putting the individual at the center of this network.
Read the rest of this entry »
Incoming search terms for the article:product design
(246), sustainable product design
(74), sustainable design
(46), sustainable product
(31), sustainability design
(29), green design product
(26), green product design
(26), sustainable products
(19), product design concept
(11), Sustainable Architecture
(2), sustainablity & production
Solar Powered Pyramids from ACXT
BTEK Technology Interpretation Centre is an innovative and environmentally friendly architectural masterpiece with the aim of showing the innovative technologies of the future. Located in Spain, the structure was designed by Gonzalo Carro and Javier Perez Uribarri of ACXT architecture firm.
Read the rest of this entry »
Incoming search terms for the article:solar pyramid
(12), Powered by Article Dashboard science for kids pluto
Glitter-sized Solar Photovoltaics Produce Competitive Results
Adventures in microsolar supported by microelectronics and MEMS techniques
Representative thin crystalline-silicon photovoltaic cells – these are from 14 to 20 micrometers thick and 0.25 to 1 millimeter across.
Sandia National Laboratories scientists have developed tiny glitter-sized photovoltaic cells that could revolutionize the way solar energy is collected and used.
The tiny cells could turn a person into a walking solar battery charger if they were fastened to flexible substrates molded around unusual shapes, such as clothing.
The solar particles, fabricated of crystalline silicon, hold the potential for a variety of new applications. They are expected eventually to be less expensive and have greater efficiencies than current photovoltaic collectors that are pieced together with 6-inch- square solar wafers.
The cells are fabricated using microelectronic and microelectromechanical systems (MEMS) techniques common to today’s electronic foundries.
Sandia lead investigator Greg Nielson said the research team has identified more than 20 benefits of scale for its microphotovoltaic cells. These include new applications, improved performance, potential for reduced costs and higher efficiencies.
“Eventually units could be mass-produced and wrapped around unusual shapes for building-integrated solar, tents and maybe even clothing,” he said. This would make it possible for hunters, hikers or military personnel in the field to recharge batteries for phones, cameras and other electronic devices as they walk or rest.
Sandia project lead Greg Nielson holds a solar cell test prototype with a microscale lens array fastened above it. Together, the cell and lens help create a concentrated photovoltaic unit.
Even better, such microengineered panels could have circuits imprinted that would help perform other functions customarily left to large-scale construction with its attendant need for field construction design and permits.
Said Sandia field engineer Vipin Gupta, “Photovoltaic modules made from these microsized cells for the rooftops of homes and warehouses could have intelligent controls, inverters and even storage built in at the chip level. Such an integrated module could greatly simplify the cumbersome design, bid, permit and grid integration process that our solar technical assistance teams see in the field all the time.”
For large-scale power generation, said Sandia researcher Murat Okandan, “One of the biggest scale benefits is a significant reduction in manufacturing and installation costs compared with current PV techniques.”
Part of the potential cost reduction comes about because microcells require relatively little material to form well-controlled and highly efficient devices.
From 14 to 20 micrometers thick (a human hair is approximately 70 micrometers thick), they are 10 times thinner than conventional 6-inch-by-6-inch brick-sized cells, yet perform at about the same efficiency.
100 times less silicon generates same amount of electricity
“So they use 100 times less silicon to generate the same amount of electricity,” said Okandan. “Since they are much smaller and have fewer mechanical deformations for a given environment than the conventional cells, they may also be more reliable over the long term.”
Another manufacturing convenience is that the cells, because they are only hundreds of micrometers in diameter, can be fabricated from commercial wafers of any size, including today’s 300-millimeter (12-inch) diameter wafers and future 450-millimeter (18-inch) wafers. Further, if one cell proves defective in manufacture, the rest still can be harvested, while if a brick-sized unit goes bad, the entire wafer may be unusable. Also, brick-sized units fabricated larger than the conventional 6-inch-by-6-inch cross section to take advantage of larger wafer size would require thicker power lines to harvest the increased power, creating more cost and possibly shading the wafer. That problem does not exist with the small-cell approach and its individualized wiring.
From left to right, Sandia researchers Murat OKandan, Greg Nielson, and Jose Luis Cruz-Campa, hold samples containing arrays of microsolar cells.
Other unique features are available because the cells are so small. “The shade tolerance of our units to overhead obstructions is better than conventional PV panels,” said Nielson, “because portions of our units not in shade will keep sending out electricity where a partially shaded conventional panel may turn off entirely.”
Because flexible substrates can be easily fabricated, high-efficiency PV for ubiquitous solar power becomes more feasible, said Okandan.
A commercial move to microscale PV cells would be a dramatic change from conventional silicon PV modules composed of arrays of 6-inch-by-6-inch wafers. However, by bringing in techniques normally used in MEMS, electronics and the light-emitting diode (LED) industries (for additional work involving gallium arsenide instead of silicon), the change to small cells should be relatively straightforward, Gupta said.
Each cell is formed on silicon wafers, etched and then released inexpensively in hexagonal shapes, with electrical contacts prefabricated on each piece, by borrowing techniques from integrated circuits and MEMS.
Offering a run for their money to conventional large wafers of crystalline silicon, electricity presently can be harvested from the Sandia-created cells with 14.9 percent efficiency. Off-the-shelf commercial modules range from 13 to 20 percent efficient.
A widely used commercial tool called a pick-and-place machine — the current standard for the mass assembly of electronics — can place up to 130,000 pieces of glitter per hour at electrical contact points preestablished on the substrate; the placement takes place at cooler temperatures. The cost is approximately one-tenth of a cent per piece with the number of cells per module determined by the level of optical concentration and the size of the die, likely to be in the 10,000 to 50,000 cell per square meter range. An alternate technology, still at the lab-bench stage, involves self-assembly of the parts at even lower costs.
Solar concentrators — low-cost, prefabricated, optically efficient microlens arrays — can be placed directly over each glitter-sized cell to increase the number of photons arriving to be converted via the photovoltaic effect into electrons. The small cell size means that cheaper and more efficient short focal length microlens arrays can be fabricated for this purpose.
High-voltage output is possible directly from the modules because of the large number of cells in the array. This should reduce costs associated with wiring, due to reduced resistive losses at higher voltages.
Other possible applications for the technology include satellites and remote sensing.
The project combines expertise from Sandia’s Microsystems Center; Photovoltaics and Grid Integration Group; the Materials, Devices, and Energy Technologies Group; and the National Renewable Energy Lab’s Concentrating Photovoltaics Group.
Involved in the process, in addition to Nielson, Okandan and Gupta, are Jose Luis Cruz-Campa, Paul Resnick, Tammy Pluym, Peggy Clews, Carlos Sanchez, Bill Sweatt, Tony Lentine, Anton Filatov, Mike Sinclair, Mark Overberg, Jeff Nelson, Jennifer Granata, Craig Carmignani, Rick Kemp, Connie Stewart, Jonathan Wierer,
George Wang, Jerry Simmons, Jason Strauch, Judith Lavin and Mark Wanlass (NREL).
The work is supported by DOE’s Solar Energy Technology Program and Sandia’s Laboratory Directed Research & Development program, and has been presented at four technical conferences this year.
The ability of light to produce electrons, and thus electricity, has been known for more than a hundred years.
Incoming search terms for the article:photovoltaics sale
(34), photovoltaic cells for sale
(12), photovoltaics for sale
Solar Light Tubes
Initial concept of light tubes developed by the ancient Egyptians, namely by direct use of natural light tubes with reflective material. This is the concept of the oldest and most widespread type of natural lighting of interior space.
Light tubes are also known as “tubular skylight”, “SunScope” or “Tubular Daylighting Device” allow natural light into the darkened interior room of buildings and houses. The people enjoy the natural lighting provided by skylights. However, skylights are often not evenly distribute the light, is the loss of a significant source of energy, and UV light can cause damage to the carpet and furniture. Light tubes, on the other hand, using the sun for lighting interiors without the shortcomings associated with conventional skylights. To prevent the danger of ultraviolet radiation (UV) from the carpet and furniture fading, UV inhibitors formed a dome roof on most models. Another bonus when choosing light tubes is that they provide far more heat slightly, as did the standard skylights. Because of the lack of acceptance of this heat, tubular skylights to save money on air conditioning bills during hot months.
Taking advantage of free sunlight as much as possible, the pipe hole collect sunlight from the roof dome light collector consists of an acrylic lens, bounce it to the bottom of a tube with a highly reflective interior coating, to pull the lens cap is similar to conventional recessed lighting equipment and diffuse sun light evenly throughout the interior rooms. The tube can be bent and adapted to drive around the garret or ceiling obstructions with small loss of light transmitting and can often be installed in less than three hours. Not like the ceiling of need roof to the ceiling of the timber-framed shaft and covered with drywall or wood panels, and the need for structural modifications, so installation is simple and relatively inexpensive.
Roof mounted dome made of high quality acrylic resin specially formulated to enhance the impact strength, chemical, weather resistance and high clarity.
Light tubes can be installed on almost all types of roof materials, including wood and asphalt shingles, concrete and ceramics, and metals. Thanks to a highly reflective coating on the rod, the tube can work efficiently from sunrise to sunset.
Most of the producers of glass tubular solar roof offers a 10-year warranty against defects in materials and post-installation cracks or discoloration. Tubes solar installation contractors generally offer a 2-3 year warranty for the installation of weatherproofing and storm protection.
The average size of the tubular skylight ranges between 10 and 21 inches (254 and 533 mm), diameter, which effectively light of 100-600 square feet (30,48-182,88 meters), interior space. The main factor in choosing a general measure of the distance between the roof rafters and / or ceiling beams.
Prices range from around $ 171.00 to $ 423.00. Installing a solar tube usually cost between $ 500 and $ 800. Both depend on the size of tubes and features installed.
Light tube options include:
- Dimmers which allows the natural lighting level of a room that will turn up or down according to demand.
- Light kit for night time lighting.
- Ventilation fan kit
Energy-efficient light tubes is an important part of the house and environmentally friendly buildings. Natural light effects on your physical, emotional and psychological well known as the rooms benefit from natural sunlight free will positively impact our environment for future generations. They are environmentally-friendly way to naturally brighten every room, a smart alternative to skylights and artificial lighting.
Incoming search terms for the article:solar tubes
What Does Solar Cell Mean?
You may have seen a calculator that has a solar cell? calculator that does not need batteries, and in some cases do not even have the off button. As long as you have enough light, so the calculator can be on at any time and forever. You may have seen larger solar panels, such as in housing or traffic lights, haven’t you? In this article I will review how solar cell work so it can deliver the energy and drive an electronic device.
Today the demand for electricity has become a major requirement in all corners. The presence of power plants sometimes do not solve the need for electricity especially in remote areas where the terrain is always an excuse. Here an alternative energy that can be easily found in nature and can be used as an alternative free energy replacing conventional electricity, because it can turn on household electronics such as televisions, radios and lights.
Solar cells made from pieces of a very small silicon coated with special chemicals to form the basis of solar cells. Solar cells generally have a minimum thickness of 0.3 mm is made from semiconductor materials incision with positive and negative poles. Each solar cell produces usually voltage 0.5 volts. Solar cells is an active element (semiconductor) that utilizes photovoltaic effect to transform solar energy into electrical energy.
Solar cells contain a connection (junction) between two thin layers made of semiconductor materials, each of which is known as a semiconductor type “P” (positive) and semiconductor type “N” (negative).
N-type semiconductor made of silicon crystals and there are also some other materials (typically phosphorus) within the limits that these materials can provide an excess of free electrons.
Electrons are sub atomic particles are negatively charged, so that the silicon alloy in this case known as N-type semiconductor (Negative). P-type semiconductor made of silicon crystal in which there is a small amount of other material (typically boron) which caused the shortage of material free electrons. Lack or loss of electrons is called a hole. Because there is no or lack of electrons electrically negative charged then the silicon alloys in this case as a semiconductor type-P (Positive).
Composition of a solar cell, the same as a diode, consisting of two layers, called PN junction. PN junction obtained by staining a pure semiconductor silicon (valence 4) with the impurity valence 3 on the left side, and one on the right impurity stained with valence 5.
The effect of the electric field in a PV cell
Operation of a PV cell
Basic structure of a generic silicon PV cell
Thus formed on the left side that is not pure silicon again and called P type silicon, while the right side is called silicon type N. In the pure silicon there are two kinds of electrical charge carriers are balanced. Positive electric charge carriers called holes, while the negative are called electrons. After a desecration process, in the P type silicon formed holes (positive charge carriers) in a very large number compared with the electron. Therefore, in the P type silicon holes are majority charge carriers, while the electrons are minority carriers. Conversely, in the N type silicon is formed of electrons in a very large number so-called majority carriers, and holes called minority carriers.
In the silicon rod there was interaction between the P and the N. Therefore called the PN junction. When present, the P associated with the positive pole of a battery, while the negative polar associated with the N, then there is a relationship called “forward bias”.
Under forward bias, electrical currents arise in a series due to both types of charge carriers. So the electric current flowing in the PN junction is caused by the movement of electron and the movement of holes. An electric current is flowing in the direction of holes movement, but opposite direction with the movement of electrons. Just to further explain, electrons moving in the conductor material can lead to electrical energy. And electrical energy is called as an electric current that flows in the opposite direction to the movement of electrons.
But, if the P associated with negative pole of batteries and the N associated with positive pole, then now formed a relationship called “reverse bias”. In these circumstances, the hole (positive charge carriers) can be connected directly to the positive pole, while the electrons are also directly to the positive pole. So, clearly in the PN junction there is no movement of majority charge carriers either the holes or electrons. Meanwhile, the minority charge carriers (electrons) in the part P moves trying to reach the positive pole of the batteries. Similarly, the minority charge carriers (holes) in the N also moved to reach the negative pole. Therefore, in a state of reverse bias, in the PN junction there is also output current even in very small amounts (micro amperes). This current is often called the reverse saturation current or leakage current.
Anything interesting in reverse bias. When the temperature of PN junction raised they will be able to enlarge leakage current. Means that if given the energy (heat), the minority charge carriers in the PN junction grows. Because the light is one form of energy, so if there is light that hit a PN junction may also produce enough energy to generate charge carriers. This symptoms are called photoconductive. Based on the photoconductive symptoms made of photodiode electronic components from PN junction.
In reverse bias, with increasing intensity of light that hit photodiode can increase the level of leakage current. Leakage currents can also be enlarged by increasing the battery voltage (reverse voltage), but the addition of leakage currents were not significant. When the batteries in the reverse bias circuit is removed and replaced with a load of resistance, the provision of light that can cause charge carriers both holes and electrons. If the illumination light is increased, current output was greater. Such symptoms are called photovoltaic. Light can provide enough energy to enlarge the number of holes in the P and the number of electrons on the N. Based on the symptoms of this photovoltaic electronic components can be created photovoltaic cell. Because usually the sun as a source of light, the photovoltaic cell is also called the solar cell (solar cells) or a solar energy converter.
So the solar cell is essentially a large photo diode and designed by referring to the photovoltaic symptoms so that could produce the greatest possible power. P type silicon is the very thin surface layer so that light can penetrate directly reach the junction. Part P is given ring-shaped nickel layer, as a positive output terminal. Under the P is the N type that is coated with nickel as well as the negative output terminal.
To obtain a large enough power required much of solar cells. Usually, solar cells arranged form the shape of the panel, and is called the photovoltaic panels (PV). PV as a source of electric power was first used in satellites. Then PV as an energy source for cars, so there are solar electric car. Now, in foreign countries, PV has started to be used as a roof or wall of the house. Sanyo has made even a semi-transparent PV that can be used as a substitute for glass.
After getting the output of the solar cell is a direct electrical current can be used to load utilized. But also the electric current can be used as a charge stored by the battery to be used when needed, especially at night because there was no sun.
If the solar cell is used for storage into the battery, then the resulting voltage magnitude must be above the battery specification. For example the battery used is 12 volts, the voltage produced by solar cell must be above 12 volts in order to perform charging.
We recommend that before carrying out the charging battery should be empty because the incoming flow will be filled with the maximum. The unit capacity of a battery is the Ampere-hour (Ah) and these characteristics are usually found on the label of a battery. For example a battery with 10 Ah capacity will fill up for 10 hours with the solar cell output currents of 1 Ampere.
Incoming search terms for the article:solar panel diagram
(89), solar cell diagram
(68), solar energy diagram
(29), solar panels diagram
(24), semiconductor diagram
(23), diagram of solar cell
(21), solar cells diagram
(18), Solar Cell
(17), solar cells for sale
(12), solar panel labelled diagram
(11), labelled diagram of a solar panel
(11), SOLAR PANEL
(10), solar cells
(3), lighting solar diagram
(3), circuit diagram of how a photovoltaic cell works
(2), solar lighting plant biagrams
(1), what is solar saturation
(1), what do you mean by solar cell
(1), 24 pieces photovoltaic wiring schematic
(1), solar light cell
How Solar Power Plant Installation
Solar Power Plant is a system of clean energy and produce electricity from sunlight. Also support the issue of global warming. Because energy is widely used by State Electricity Enterprise is the energy that can not be renewable (fossil) fuel such as kerosene, gas, coal, etc. Whereas current cost of fuel has begun to become dearer. If using the sun is free energy available abundant.
Installation and Operation is very easy, enduring long and a very inexpensive investment option to be public at this time. Can be used to meet electricity needs anywhere, especially in rural areas or areas that do not (not yet) reached by State Electricity Enterprise network.
Various Benefits of Using Solar Power Plant:
- Source of energy that never runs out and is very environmentally friendly
- Can be used anywhere, especially areas that have not yet reached by State Electricity Enterprise network
- No need to pay State Electricity Enterprise
- Without fuel and pollution-free
- Not require special treatment
- Free from all treatment
- Can be used to light a variety of electrical equipment, especially for lighting the lamp, radio, cassette, TV
- Can be used for emergency lighting when electricity of State Electricity Enterprise, have extinction (power off)
- And so on
Principles of Sun Power Plant
In the daylight the solar panel receives light (rays) of the sun and then converted into electricity through the Photovoltaic. Electricity generated by solar panels can be directly channeled to burden or stored in Electric Box System (EBS), before use to load, light, radio, TV etc.
At the night, where the solar panel does not generate electricity. Electricity that has been collected (stored) in a Electric Box System (EBS) will be used. To turn on electrical equipment, especially the lighting, etc.
Components of Solar Power Plant
1. Solar Panel:
Change the sunlight into electricity. Modular form of the solar panel provides the ease of the electricity needs for various scale of the needs.
2. Electric Box System (EBS):
- Set of traffic from the solar panel to the load
- Saving electric current generated by the solar panel before used to drive the load. Burden can be a lamp, electronic device and other equipment that requires electricity
- Very flexible in placement, you can take shift about.
The Design of Solar Power Plant – The Practical and Flexible
With a flexible design that can be possible to increase the capacity of electricity with solar panels only add (maximum 2 solar panel) for each package.
Installation HOW VERY EASY
- Place solar panel outside the house (roof, roof tile, or make your own tower, etc.) directly to the sunlight adjust with the situation / place / situation you secure place
- Pull cable from solar panel, and enter plug to EBS IN DC (There are DC IN and DC OUT) Plus ON-OFF if you use (do not forget to note the ON-OFF key If you use ON if not used right OFF). For a cable if less in length you can add/connect your own. Set EBS & cable installation neat and safely out of reach of children etc.
- If solar panel at work, on the EBS have red indicator lights, when charging energy from the panel to EBS will be full, red indicator light will turn on flicker, if it is full will be off. Green indicator lights mark the flow you are working.
- In the EBS (Electric Box System) have stop contact Out AC is useful to set the electronic equipment appropriate with watt and energy saved. You can also make your own plug combination for parallel needs. (Many stop contacts that have sold in the market with 2 holes, 4 holes, 6 holes, etc.) find the high quality.
- Ready to use to set the lights, tv, radio, etc
Article You May Be Interested In Reading: Solar Fountain
Incoming search terms for the article:solar power plant diagram
(187), solar power plant
(125), solar powerplant
(50), diagram of solar power plant
(34), solar cell diagram
(26), solar cell working
(24), how solar panels work diagram
(23), photovoltaic diagram
(23), solar power plants diagram
(22), sunlight energy
(22), how does solar energy work
(21), solar power station diagram
(20), how solar power works diagram
(19), how solar energy works diagram
(17), solar power plants
(17), diagram of how solar energy works
(15), how a solar panel works diagram
(15), solar power plant layout
(14), Block diagram of solar power Plant
(14), solar panel diagram