Search Results

Solar Travel Charger

October 26, 2011 By: Admin Category: Solar Charger

A-Solar Travel Pal

If you do a lot of camping in the summer and likes to travel, hate it when your battery died right before you call your friends, then you need a solar-Travel Pal, a small, light weight, and cute 3in1 solarkit, equipped with USB output, a flashlight and alarm.

Through the solar panel, the internal battery will automatically recharged by the sun. You can use a USB output so you can recharge your cell phone. The A-Solar Travel Pal also features attached flashlight that you can use to illuminate a dark place. The alarm sounds, for example, if you are in need, loud signal clear for miles around.

Priced at just €29.00, The A-Solar Travel Pal can be recharged by solar power, USB and hand crank.

Read the rest of this entry »

Incoming search terms for the article:

Comment (1)

Solar iPhone Case

October 13, 2011 By: Admin Category: Solar Accessories, Solar Gadgets

Rechargeable Battery Case with Solar Panel for iPhone 4®

The Mobius by Etón, is an iPhone 4 external battery case and protective cover equipped with Solar Panel.

The Mobius operates from a rechargeable Li-ion battery (1800mAh capacity) and can be charged by the solar panel or the micro USB cable.

Retailing for a modest $77.59, this Solar iPhone Case provides up to 25 minutes of talk time per hour of direct sunlight.

Read the rest of this entry »

Incoming search terms for the article:

Comments (3)

Solar Android

July 05, 2011 By: Admin Category: Solar Gadgets

Umeox Apollo – The First Solar Powered Android Phone

A company from China, Umeox teamed up with Dutch company Intivation recently introduce their latest products in the Mobile World Congress 2011 in Barcelona, Umeox Apollo. The device has a solar panel embedded in the back of the phone and it may be the world’s first Android phone that uses solar power.

Read the rest of this entry »

Incoming search terms for the article:

No Comments →

Solar Ebook

July 05, 2011 By: Admin Category: Solar Gadgets

Biblio Leaf – A Solar Powered Ebook from Toshiba

Toshiba and KDDI have unveiled solar ebook reader, called Biblio Leaf.

Read the rest of this entry »

Incoming search terms for the article:

Powered by Article Dashboard japan technology (2), Powered by Article Dashboard toshiba (2), Powered by Article Dashboard ebook software -compiler (1), Powered by Article Dashboard facts about japan (1), Powered by Article Dashboard leaves (1), Powered by Article Dashboard reference (1), solalight sye (1)

No Comments →

Solar Applications

June 21, 2011 By: Admin Category: Solar Power

Solar Energy Applications

Solar energy technologies use energy from the sun to produce heat, light, hot water, electricity, and even cooling, for homes, commercial and industrial.

There are a variety of technological applications that have been developed to take advantage of solar energy. Technology can be read further below.

Photovoltaics System

Solar cells work by converting sunlight directly into electricity. The electrons in the semiconductor material, the material used to capture sunlight, will move when the sun’s energy in the form of photons hit it. Solar energy is forcing the electrons to move, occur continuously, and consequently there is also a continuous electricity production. Process, which turns sunlight (photons) into electricity (voltage), called the photovoltaic effect.

Solar Cell Module

Solar cells are usually organized into modules that each module can consist of 40 solar cells. Some modules can be arranged to form a PV line fitted with a fixed angle facing south. Or even could be placed in a sun-tracking device, to get more solar energy throughout the day. Several rows of PV could produce enough power for a house. As for industrial applications or power companies, hundreds of lines of PV can be linked to form one large PV systems and sufficient to meet the electricity needs.

Thin Film Solar Cell

Thin film solar cells use several layers of semiconductor material with a thickness in the micrometer scale. Technology allows to create solar cells integrated into rooftops to the skylights. Even solar cells are designed for applications having the same power with actual roof.

Read the rest of this entry »

Incoming search terms for the article:

No Comments →

Space Solar Power

February 25, 2010 By: Admin Category: Solar Cells

Space Solar Power System

Like the story of a fictional movie, but Japanese space agency plan so serious: In 2030 they will capture solar energy in space and sends it to Earth via laser or microwave.

Read the rest of this entry »

Incoming search terms for the article:

Comments (9)

Photovoltaic Cells

December 21, 2009 By: Admin Category: Solar Cells

Glitter-sized Solar Photovoltaics Produce Competitive Results

Adventures in microsolar supported by microelectronics and MEMS techniques

photovoltaic cells micro Photovoltaic Cells

Representative thin crystalline-silicon photovoltaic cells – these are from 14 to 20 micrometers thick and 0.25 to 1 millimeter across.

Sandia National Laboratories scientists have developed tiny glitter-sized photovoltaic cells that could revolutionize the way solar energy is collected and used.

The tiny cells could turn a person into a walking solar battery charger if they were fastened to flexible substrates molded around unusual shapes, such as clothing.

The solar particles, fabricated of crystalline silicon, hold the potential for a variety of new applications. They are expected eventually to be less expensive and have greater efficiencies than current photovoltaic collectors that are pieced together with 6-inch- square solar wafers.

The cells are fabricated using microelectronic and microelectromechanical systems (MEMS) techniques common to today’s electronic foundries.

Sandia lead investigator Greg Nielson said the research team has identified more than 20 benefits of scale for its microphotovoltaic cells. These include new applications, improved performance, potential for reduced costs and higher efficiencies.

“Eventually units could be mass-produced and wrapped around unusual shapes for building-integrated solar, tents and maybe even clothing,” he said. This would make it possible for hunters, hikers or military personnel in the field to recharge batteries for phones, cameras and other electronic devices as they walk or rest.

cells photovoltaic nielson Photovoltaic Cells

Sandia project lead Greg Nielson holds a solar cell test prototype with a microscale lens array fastened above it. Together, the cell and lens help create a concentrated photovoltaic unit.

Even better, such microengineered panels could have circuits imprinted that would help perform other functions customarily left to large-scale construction with its attendant need for field construction design and permits.

Said Sandia field engineer Vipin Gupta, “Photovoltaic modules made from these microsized cells for the rooftops of homes and warehouses could have intelligent controls, inverters and even storage built in at the chip level. Such an integrated module could greatly simplify the cumbersome design, bid, permit and grid integration process that our solar technical assistance teams see in the field all the time.”

For large-scale power generation, said Sandia researcher Murat Okandan, “One of the biggest scale benefits is a significant reduction in manufacturing and installation costs compared with current PV techniques.”

Part of the potential cost reduction comes about because microcells require relatively little material to form well-controlled and highly efficient devices.

From 14 to 20 micrometers thick (a human hair is approximately 70 micrometers thick), they are 10 times thinner than conventional 6-inch-by-6-inch brick-sized cells, yet perform at about the same efficiency.

100 times less silicon generates same amount of electricity

“So they use 100 times less silicon to generate the same amount of electricity,” said Okandan. “Since they are much smaller and have fewer mechanical deformations for a given environment than the conventional cells, they may also be more reliable over the long term.”

Another manufacturing convenience is that the cells, because they are only hundreds of micrometers in diameter, can be fabricated from commercial wafers of any size, including today’s 300-millimeter (12-inch) diameter wafers and future 450-millimeter (18-inch) wafers. Further, if one cell proves defective in manufacture, the rest still can be harvested, while if a brick-sized unit goes bad, the entire wafer may be unusable. Also, brick-sized units fabricated larger than the conventional 6-inch-by-6-inch cross section to take advantage of larger wafer size would require thicker power lines to harvest the increased power, creating more cost and possibly shading the wafer. That problem does not exist with the small-cell approach and its individualized wiring.

photovoltaic cell group1 Photovoltaic Cells

From left to right, Sandia researchers Murat OKandan, Greg Nielson, and Jose Luis Cruz-Campa, hold samples containing arrays of microsolar cells.

Other unique features are available because the cells are so small. “The shade tolerance of our units to overhead obstructions is better than conventional PV panels,” said Nielson, “because portions of our units not in shade will keep sending out electricity where a partially shaded conventional panel may turn off entirely.”

Because flexible substrates can be easily fabricated, high-efficiency PV for ubiquitous solar power becomes more feasible, said Okandan.

A commercial move to microscale PV cells would be a dramatic change from conventional silicon PV modules composed of arrays of 6-inch-by-6-inch wafers. However, by bringing in techniques normally used in MEMS, electronics and the light-emitting diode (LED) industries (for additional work involving gallium arsenide instead of silicon), the change to small cells should be relatively straightforward, Gupta said.

Each cell is formed on silicon wafers, etched and then released inexpensively in hexagonal shapes, with electrical contacts prefabricated on each piece, by borrowing techniques from integrated circuits and MEMS.

Offering a run for their money to conventional large wafers of crystalline silicon, electricity presently can be harvested from the Sandia-created cells with 14.9 percent efficiency. Off-the-shelf commercial modules range from 13 to 20 percent efficient.

A widely used commercial tool called a pick-and-place machine — the current standard for the mass assembly of electronics — can place up to 130,000 pieces of glitter per hour at electrical contact points preestablished on the substrate; the placement takes place at cooler temperatures. The cost is approximately one-tenth of a cent per piece with the number of cells per module determined by the level of optical concentration and the size of the die, likely to be in the 10,000 to 50,000 cell per square meter range. An alternate technology, still at the lab-bench stage, involves self-assembly of the parts at even lower costs.

Solar concentrators — low-cost, prefabricated, optically efficient microlens arrays — can be placed directly over each glitter-sized cell to increase the number of photons arriving to be converted via the photovoltaic effect into electrons. The small cell size means that cheaper and more efficient short focal length microlens arrays can be fabricated for this purpose.

High-voltage output is possible directly from the modules because of the large number of cells in the array. This should reduce costs associated with wiring, due to reduced resistive losses at higher voltages.

Other possible applications for the technology include satellites and remote sensing.

The project combines expertise from Sandia’s Microsystems Center; Photovoltaics and Grid Integration Group; the Materials, Devices, and Energy Technologies Group; and the National Renewable Energy Lab’s Concentrating Photovoltaics Group.

Involved in the process, in addition to Nielson, Okandan and Gupta, are Jose Luis Cruz-Campa, Paul Resnick, Tammy Pluym, Peggy Clews, Carlos Sanchez, Bill Sweatt, Tony Lentine, Anton Filatov, Mike Sinclair, Mark Overberg, Jeff Nelson, Jennifer Granata, Craig Carmignani, Rick Kemp, Connie Stewart, Jonathan Wierer,

George Wang, Jerry Simmons, Jason Strauch, Judith Lavin and Mark Wanlass (NREL).

The work is supported by DOE’s Solar Energy Technology Program and Sandia’s Laboratory Directed Research & Development program, and has been presented at four technical conferences this year.

The ability of light to produce electrons, and thus electricity, has been known for more than a hundred years.

[Via]

Incoming search terms for the article:

photovoltaics sale (34), photovoltaics for sale (12), photovoltaic cells for sale (11), light concentrators (1), Photovoltaic (PV) cell on sale (1), photovoltaic cell (1), Powered by Article Dashboard a 10 gallon freshwater aquarium (1)

Comments (8)

Solar Cell

November 24, 2009 By: Admin Category: Solar Cells

What Does Solar Cell Mean?

You may have seen a calculator that has a solar cell? calculator that does not need batteries, and in some cases do not even have the off button. As long as you have enough light, so the calculator can be on at any time and forever. You may have seen larger solar panels, such as in housing or traffic lights, haven’t you? In this article I will review how solar cell work so it can deliver the energy and drive an electronic device.

Today the demand for electricity has become a major requirement in all corners. The presence of power plants sometimes do not solve the need for electricity especially in remote areas where the terrain is always an excuse. Here an alternative energy that can be easily found in nature and can be used as an alternative free energy replacing conventional electricity, because it can turn on household electronics such as televisions, radios and lights.
solar cell p n Solar Cell
Solar cells made from pieces of a very small silicon coated with special chemicals to form the basis of solar cells. Solar cells generally have a minimum thickness of 0.3 mm is made from semiconductor materials incision with positive and negative poles. Each solar cell produces usually voltage 0.5 volts. Solar cells is an active element (semiconductor) that utilizes photovoltaic effect to transform solar energy into electrical energy.

solar cell diagram Solar Cell

Solar cells contain a connection (junction) between two thin layers made of semiconductor materials, each of which is known as a semiconductor type “P” (positive) and semiconductor type “N” (negative).

N-type semiconductor made of silicon crystals and there are also some other materials (typically phosphorus) within the limits that these materials can provide an excess of free electrons.

Electrons are sub atomic particles are negatively charged, so that the silicon alloy in this case known as N-type semiconductor (Negative). P-type semiconductor made of silicon crystal in which there is a small amount of other material (typically boron) which caused the shortage of material free electrons. Lack or loss of electrons is called a hole. Because there is no or lack of electrons electrically negative charged then the silicon alloys in this case as a semiconductor type-P (Positive).

Composition of a solar cell, the same as a diode, consisting of two layers, called PN junction. PN junction obtained by staining a pure semiconductor silicon (valence 4) with the impurity valence 3 on the left side, and one on the right impurity stained with valence 5.

The effect of the electric field in a PV cell

Solar Cell

Operation of a PV cell

Basic structure of a generic silicon PV cell

Thus formed on the left side that is not pure silicon again and called P type silicon, while the right side is called silicon type N. In the pure silicon there are two kinds of electrical charge carriers are balanced. Positive electric charge carriers called holes, while the negative are called electrons. After a desecration process, in the P type silicon formed holes (positive charge carriers) in a very large number compared with the electron. Therefore, in the P type silicon holes are majority charge carriers, while the electrons are minority carriers. Conversely, in the N type silicon is formed of electrons in a very large number so-called majority carriers, and holes called minority carriers.

In the silicon rod there was interaction between the P and the N. Therefore called the PN junction. When present, the P associated with the positive pole of a battery, while the negative polar associated with the N, then there is a relationship called “forward bias”.

Under forward bias, electrical currents arise in a series due to both types of charge carriers. So the electric current flowing in the PN junction is caused by the movement of electron and the movement of holes. An electric current is flowing in the direction of holes movement, but opposite direction with the movement of electrons. Just to further explain, electrons moving in the conductor material can lead to electrical energy. And electrical energy is called as an electric current that flows in the opposite direction to the movement of electrons.

But, if the P associated with negative pole of batteries and the N associated with positive pole, then now formed a relationship called “reverse bias”. In these circumstances, the hole (positive charge carriers) can be connected directly to the positive pole, while the electrons are also directly to the positive pole. So, clearly in the PN junction there is no movement of majority charge carriers either the holes or electrons. Meanwhile, the minority charge carriers (electrons) in the part P moves trying to reach the positive pole of the batteries. Similarly, the minority charge carriers (holes) in the N also moved to reach the negative pole. Therefore, in a state of reverse bias, in the PN junction there is also output current even in very small amounts (micro amperes). This current is often called the reverse saturation current or leakage current.

.
Anything interesting in reverse bias. When the temperature of PN junction raised they will be able to enlarge leakage current. Means that if given the energy (heat), the minority charge carriers in the PN junction grows. Because the light is one form of energy, so if there is light that hit a PN junction may also produce enough energy to generate charge carriers. This symptoms are called photoconductive. Based on the photoconductive symptoms made of photodiode electronic components from PN junction.

In reverse bias, with increasing intensity of light that hit photodiode can increase the level of leakage current. Leakage currents can also be enlarged by increasing the battery voltage (reverse voltage), but the addition of leakage currents were not significant. When the batteries in the reverse bias circuit is removed and replaced with a load of resistance, the provision of light that can cause charge carriers both holes and electrons. If the illumination light is increased, current output was greater. Such symptoms are called photovoltaic. Light can provide enough energy to enlarge the number of holes in the P and the number of electrons on the N. Based on the symptoms of this photovoltaic electronic components can be created photovoltaic cell. Because usually the sun as a source of light, the photovoltaic cell is also called the solar cell (solar cells) or a solar energy converter.
So the solar cell is essentially a large photo diode and designed by referring to the photovoltaic symptoms so that could produce the greatest possible power. P type silicon is the very thin surface layer so that light can penetrate directly reach the junction. Part P is given ring-shaped nickel layer, as a positive output terminal. Under the P is the N type that is coated with nickel as well as the negative output terminal.

To obtain a large enough power required much of solar cells. Usually, solar cells arranged form the shape of the panel, and is called the photovoltaic panels (PV). PV as a source of electric power was first used in satellites. Then PV as an energy source for cars, so there are solar electric car. Now, in foreign countries, PV has started to be used as a roof or wall of the house. Sanyo has made even a semi-transparent PV that can be used as a substitute for glass.

After getting the output of the solar cell is a direct electrical current can be used to load utilized. But also the electric current can be used as a charge stored by the battery to be used when needed, especially at night because there was no sun.

If the solar cell is used for storage into the battery, then the resulting voltage magnitude must be above the battery specification. For example the battery used is 12 volts, the voltage produced by solar cell must be above 12 volts in order to perform charging.

We recommend that before carrying out the charging battery should be empty because the incoming flow will be filled with the maximum. The unit capacity of a battery is the Ampere-hour (Ah) and these characteristics are usually found on the label of a battery. For example a battery with 10 Ah capacity will fill up for 10 hours with the solar cell output currents of 1 Ampere.

Incoming search terms for the article:

solar panel diagram (85), solar cell diagram (66), solar panels diagram (24), diagram of solar cell (21), solar energy diagram (20), semiconductor diagram (19), solar cells diagram (18), Solar Cell (16), solar cells for sale (12), diagram of solar panel (6), solar panels (4), labelled diagram of a solar cell (3), solar energy diagrams (2), solar cells connection (2), labelled diagram of solar panel (2), labelled diagram of a solar panel (2), solar panel diagram of layers (1), type of semiconductor in solar (1), solar array diagram (1), simple solar panel drawing (1)

Comments (35)

Solar Power Systems

November 20, 2009 By: Admin Category: Solar Power

Grid-connected System

Grid-connected system was applied to many urban areas housing, existing electricity network. The purpose of using solar panels, to save the cost of excessive electricity consumption and help reduce the greenhouse effect caused by the use of fossil fuels which cause excessive air pollution. Electrical energy which is in turn, channeled into the electricity networks that already exist and can be stored in the electricity network. This term is called the Hybrid System, which combine solar power plants with electricity network. Solar systems can also be combined with other power plants such as PV-Generator Hybrid, Hybrid PV-Microhydro, Hybrid PV-Wind and can even be combined into 3 systems of different power to Hybrid PV-Wind-Generator.

The following illustration application of grid connected systems in housing

solar power systems Solar Power Systems

Caption:

1. Solar panels installed at suitable locations to generate optimal power.
2. Inverter (Controller) function to change direct current (DC) produced by PV into alternating current (AC) that can be applied to household electronic equipment.
3. Box distribution function to distribute the AC current through the PV generated electricity network.
4. Discharging the burden of household air-conditioning system.
5. Electric meter show the current of electricity network will b

Incoming search terms for the article:

Comments (7)

Nanosolar

May 24, 2009 By: Admin Category: Nanosolar, Solar Cells

Nanosolar Powersheet

Executive Summary about Nanosolar by nanosolar.com -MICHAEL MOYER

Imagine a solar panel without the panel. Just a coating, thin as a layer of paint, that takes light and converts it to electricity. From there, you can picture roof shingles with solar cells built inside and window coatings that seem to suck power from the air.

Cost has always been one of solar’s biggest problems. Traditional solar cells require silicon, and silicon is an expensive commodity (exacerbated currently by a global silicon shortage). That means even the cheapest solar panels cost about $3 per watt of energy they go on to produce.

Nanosolar’s cells use no silicon, and the company’s manufacturing process allows it to create cells that are as efficient as most commercial cells for as little as 30 cents a watt. “It really is quite a big deal in terms of altering the way we think about solar and in inherently altering the economics of solar.”

In San Jose, Nanosolar has built what will soon be the world’s largest solar-panel manufacturing facility. California, for instance, recently launched the Million Solar Roofs initiative, which will provide tax breaks and rebates to encourage the installation of 100,000 solar roofs per year, every year, for 10 consecutive years (the state currently has 30,000 solar roofs). The company is ready for the solar boom.

NANOSOLAR: Solar-cell Coating

Executive Summary about Nanosolar by Silicon Valley

Solar panels are big, clunky, heavy, require special installation, and, if they break, replacing them can be quite expensive.

The PowerSheet is made from a layer of solar-absorbing nano-ink that is printed onto a foil-thin metal sheet.

Because of the ever-increasing costs of energy and the obvious environmental impact of burning up fossil fuels, turning to alternative energy sources such as solar energy is a priority.

Article You May Be Interested In Reading: Solar Heater

Incoming search terms for the article:

nanosolar panels for sale (121), solar paint for sale (60), photovoltaic paint for sale (57), nano solar panels for sale (35), nanosolar stock (28), nanosolar panels for sale 2011 (20), nanosolar cells for sale (20), nanosolar FOR SALE (3), Powered by Article Dashboard consumer priority service reviews (1), nano solar panel stock (1), nanosolar solar panels (1), nanosolar panels Sales (1), wrapperios (1)

Comments (6)

Solar House

May 22, 2009 By: Admin Category: Solar Home

Solar House Plans – The New Wave Of Our Future

Executive Summary about Solar House by Ernest Jarquio

Environmentalists rejoice! What is this new technology that will help save the earth? Why, solar house plans of course.

What Are Solar House Plans?

Well, the new phase in home planning is the plan for a sun-powered home.

Environmentally-Friendly Materials

The designer begins by drawing out the floor plan, planing to use recycled materials, eco-friendly building supplies and Energy-Star electrical outlets. For instance, the concrete slab flooring stores solar heat during the sunny days, then releases it at night, keeping the house warm.

Insulation

The designer uses only eco-friendly items for these tasks, such as recycled wood and green material for the insulation. After all this is planned, they continue onward to Energy-Star appliances and other electronic devices.

Solar Panels

The other panels installed are the thermal water heaters, which provide hot water constantly for the entire home. This hot water is often more reliable than a traditional hot water heater, supplying plenty of heat for the laundry, kitchen and bath.

How to Plan Your House for the Sun
Executive Summary about Solar House by Naomi Kendell

Every house will gain heat throughout the day as the sun shines through its windows.

And during the night as the temperature drops, this same house will lose heat to the outside through its walls, windows and roof.

1. Orientation.

By facing your house to the south (in the northern hemisphere) you will gain the rays of the winter sun. Afternoon sun comes from the west, so rooms like the dining room and living room can be placed on this orientation. The southwest corner of the house will be the sunniest – winter and afternoon sun.

On the northern side of your house, place service rooms.

2. Window Sizing

Out of all the materials your house is made of, windows lose the most heat. There is a balance here, because windows allow sunlight into your house. However even triple glazed glass allows more heat to escape than a well insulated wall.

The first is where your windows face. If you have most of your windows on the northern side, these windows will not get much sun during winter. They will be losing heat, but not gaining solar energy.

There is an optimal ratio of windows:wall for every climate. For instance in temperate climates, a window to wall ration could be: 30% window area to 70% wall area. The other ratio is in windows and orientation.

3. Materials

For instance, highly insulated walls will keep the heat inside your house. When analyzing your heat loss through your windows, you can gain some leeway through insulation. This air forms and insulating layer, slowing down heat loss.

Another way to use materials in your solar house plan is to take advantage of heat storage. It is radiating heat. The floor is insulated underneath to prevent heat loss. A well designed thermal heat sink will stay warm all night long.

4. Shading

Shading is an important part of the solar house plan. This is important not only for heat gains, but for preventing heat gains. In temperate climates as well, shading can be used to keep summer sun out and let winter sun in.

Using our orientation principle: your house is facing south. During the winter the sun angles low and reaches far into the house. This same shading will allow winter sun into your house.

Your latitude effects the angle of the winter sun. In conclusion – solar house plans are a great way to design houses that are warm and comfortable to live in, and save you money off your heating and air conditioning bill.

Using Orientation, Window Placement, Materials and Shading, you can design a house that responds to its environment and creates its own micro-climate of comfort.

Article You May Be Interested In Reading: Charger Solar

Incoming search terms for the article:

solar house (29), solar house plans (10), Powered by Article Dashboard how to reclaim building materials (1), Powered by Article Dashboard water heater (1), solar house floor plans (1), solar panels for home (1), solar powered home designs (1)

Comments (13)

Search Results

A-Solar Travel Pal

Incoming search terms for the article:

Rechargeable Battery Case with Solar Panel for iPhone 4®

Incoming search terms for the article:

Umeox Apollo – The First Solar Powered Android Phone

Incoming search terms for the article:

Biblio Leaf – A Solar Powered Ebook from Toshiba

Incoming search terms for the article:

Solar Energy Applications

Incoming search terms for the article:

Space Solar Power System

Incoming search terms for the article:

Glitter-sized Solar Photovoltaics Produce Competitive Results

Incoming search terms for the article:

What Does Solar Cell Mean?

Incoming search terms for the article:

Grid-connected System

Incoming search terms for the article:

Nanosolar Powersheet

Incoming search terms for the article:

Solar House Plans – The New Wave Of Our Future

Incoming search terms for the article:

Sponsored Links

Recent Search Terms

Popular Search Terms

Random Search Terms

Search

Categories

Recent Posts

Tags

Friends