Executive Summary about BP Solar by Richard Chapo
British Petroleum was once known for their petroleum products. How times have changed. BP is now one of the biggest producers of solar products.
Adventures in microsolar supported by microelectronics and MEMS techniques
Representative thin crystalline-silicon photovoltaic cells – these are from 14 to 20 micrometers thick and 0.25 to 1 millimeter across.
Sandia National Laboratories scientists have developed tiny glitter-sized photovoltaic cells that could revolutionize the way solar energy is collected and used.
The tiny cells could turn a person into a walking solar battery charger if they were fastened to flexible substrates molded around unusual shapes, such as clothing.
The solar particles, fabricated of crystalline silicon, hold the potential for a variety of new applications. They are expected eventually to be less expensive and have greater efficiencies than current photovoltaic collectors that are pieced together with 6-inch- square solar wafers.
The cells are fabricated using microelectronic and microelectromechanical systems (MEMS) techniques common to today’s electronic foundries.
Sandia lead investigator Greg Nielson said the research team has identified more than 20 benefits of scale for its microphotovoltaic cells. These include new applications, improved performance, potential for reduced costs and higher efficiencies.
“Eventually units could be mass-produced and wrapped around unusual shapes for building-integrated solar, tents and maybe even clothing,” he said. This would make it possible for hunters, hikers or military personnel in the field to recharge batteries for phones, cameras and other electronic devices as they walk or rest.
Sandia project lead Greg Nielson holds a solar cell test prototype with a microscale lens array fastened above it. Together, the cell and lens help create a concentrated photovoltaic unit.
Even better, such microengineered panels could have circuits imprinted that would help perform other functions customarily left to large-scale construction with its attendant need for field construction design and permits.
Said Sandia field engineer Vipin Gupta, “Photovoltaic modules made from these microsized cells for the rooftops of homes and warehouses could have intelligent controls, inverters and even storage built in at the chip level. Such an integrated module could greatly simplify the cumbersome design, bid, permit and grid integration process that our solar technical assistance teams see in the field all the time.”
For large-scale power generation, said Sandia researcher Murat Okandan, “One of the biggest scale benefits is a significant reduction in manufacturing and installation costs compared with current PV techniques.”
Part of the potential cost reduction comes about because microcells require relatively little material to form well-controlled and highly efficient devices.
From 14 to 20 micrometers thick (a human hair is approximately 70 micrometers thick), they are 10 times thinner than conventional 6-inch-by-6-inch brick-sized cells, yet perform at about the same efficiency.
100 times less silicon generates same amount of electricity
“So they use 100 times less silicon to generate the same amount of electricity,” said Okandan. “Since they are much smaller and have fewer mechanical deformations for a given environment than the conventional cells, they may also be more reliable over the long term.”
Another manufacturing convenience is that the cells, because they are only hundreds of micrometers in diameter, can be fabricated from commercial wafers of any size, including today’s 300-millimeter (12-inch) diameter wafers and future 450-millimeter (18-inch) wafers. Further, if one cell proves defective in manufacture, the rest still can be harvested, while if a brick-sized unit goes bad, the entire wafer may be unusable. Also, brick-sized units fabricated larger than the conventional 6-inch-by-6-inch cross section to take advantage of larger wafer size would require thicker power lines to harvest the increased power, creating more cost and possibly shading the wafer. That problem does not exist with the small-cell approach and its individualized wiring.
From left to right, Sandia researchers Murat OKandan, Greg Nielson, and Jose Luis Cruz-Campa, hold samples containing arrays of microsolar cells.
Other unique features are available because the cells are so small. “The shade tolerance of our units to overhead obstructions is better than conventional PV panels,” said Nielson, “because portions of our units not in shade will keep sending out electricity where a partially shaded conventional panel may turn off entirely.”
Because flexible substrates can be easily fabricated, high-efficiency PV for ubiquitous solar power becomes more feasible, said Okandan.
A commercial move to microscale PV cells would be a dramatic change from conventional silicon PV modules composed of arrays of 6-inch-by-6-inch wafers. However, by bringing in techniques normally used in MEMS, electronics and the light-emitting diode (LED) industries (for additional work involving gallium arsenide instead of silicon), the change to small cells should be relatively straightforward, Gupta said.
Each cell is formed on silicon wafers, etched and then released inexpensively in hexagonal shapes, with electrical contacts prefabricated on each piece, by borrowing techniques from integrated circuits and MEMS.
Offering a run for their money to conventional large wafers of crystalline silicon, electricity presently can be harvested from the Sandia-created cells with 14.9 percent efficiency. Off-the-shelf commercial modules range from 13 to 20 percent efficient.
A widely used commercial tool called a pick-and-place machine — the current standard for the mass assembly of electronics — can place up to 130,000 pieces of glitter per hour at electrical contact points preestablished on the substrate; the placement takes place at cooler temperatures. The cost is approximately one-tenth of a cent per piece with the number of cells per module determined by the level of optical concentration and the size of the die, likely to be in the 10,000 to 50,000 cell per square meter range. An alternate technology, still at the lab-bench stage, involves self-assembly of the parts at even lower costs.
Solar concentrators — low-cost, prefabricated, optically efficient microlens arrays — can be placed directly over each glitter-sized cell to increase the number of photons arriving to be converted via the photovoltaic effect into electrons. The small cell size means that cheaper and more efficient short focal length microlens arrays can be fabricated for this purpose.
High-voltage output is possible directly from the modules because of the large number of cells in the array. This should reduce costs associated with wiring, due to reduced resistive losses at higher voltages.
Other possible applications for the technology include satellites and remote sensing.
The project combines expertise from Sandia’s Microsystems Center; Photovoltaics and Grid Integration Group; the Materials, Devices, and Energy Technologies Group; and the National Renewable Energy Lab’s Concentrating Photovoltaics Group.
Involved in the process, in addition to Nielson, Okandan and Gupta, are Jose Luis Cruz-Campa, Paul Resnick, Tammy Pluym, Peggy Clews, Carlos Sanchez, Bill Sweatt, Tony Lentine, Anton Filatov, Mike Sinclair, Mark Overberg, Jeff Nelson, Jennifer Granata, Craig Carmignani, Rick Kemp, Connie Stewart, Jonathan Wierer,
George Wang, Jerry Simmons, Jason Strauch, Judith Lavin and Mark Wanlass (NREL).
The work is supported by DOE’s Solar Energy Technology Program and Sandia’s Laboratory Directed Research & Development program, and has been presented at four technical conferences this year.
The ability of light to produce electrons, and thus electricity, has been known for more than a hundred years.
Solar lantern is a simplified practical application of solar cell technology, which has obtained well acceptance in rustic areas where the power supply is temporary and barely. Yet in the urban areas people favor a solar lantern as an option during power issues because of its easy mechanism.
How a Solar Lantern Runs?
A solar Lantern is produced of three essential elements – the solar cell panel, the battery and the lamp. The procedure is really easy. The solar energy is reformed to electric energy by the solar cell panel and put in a sealed maintenance-free battery for later apply during the night hours. A single charge can work the lamp for around 4-5 hours.
You may have seen a calculator that has a solar cell? calculator that does not need batteries, and in some cases do not even have the off button. As long as you have enough light, so the calculator can be on at any time and forever. You may have seen larger solar panels, such as in housing or traffic lights, haven’t you? In this article I will review how solar cell work so it can deliver the energy and drive an electronic device.
Today the demand for electricity has become a major requirement in all corners. The presence of power plants sometimes do not solve the need for electricity especially in remote areas where the terrain is always an excuse. Here an alternative energy that can be easily found in nature and can be used as an alternative free energy replacing conventional electricity, because it can turn on household electronics such as televisions, radios and lights.
Solar cells made from pieces of a very small silicon coated with special chemicals to form the basis of solar cells. Solar cells generally have a minimum thickness of 0.3 mm is made from semiconductor materials incision with positive and negative poles. Each solar cell produces usually voltage 0.5 volts. Solar cells is an active element (semiconductor) that utilizes photovoltaic effect to transform solar energy into electrical energy.
Solar cells contain a connection (junction) between two thin layers made of semiconductor materials, each of which is known as a semiconductor type “P” (positive) and semiconductor type “N” (negative).
N-type semiconductor made of silicon crystals and there are also some other materials (typically phosphorus) within the limits that these materials can provide an excess of free electrons.
Electrons are sub atomic particles are negatively charged, so that the silicon alloy in this case known as N-type semiconductor (Negative). P-type semiconductor made of silicon crystal in which there is a small amount of other material (typically boron) which caused the shortage of material free electrons. Lack or loss of electrons is called a hole. Because there is no or lack of electrons electrically negative charged then the silicon alloys in this case as a semiconductor type-P (Positive).
Composition of a solar cell, the same as a diode, consisting of two layers, called PN junction. PN junction obtained by staining a pure semiconductor silicon (valence 4) with the impurity valence 3 on the left side, and one on the right impurity stained with valence 5.
The effect of the electric field in a PV cell
Operation of a PV cell
Basic structure of a generic silicon PV cell
Thus formed on the left side that is not pure silicon again and called P type silicon, while the right side is called silicon type N. In the pure silicon there are two kinds of electrical charge carriers are balanced. Positive electric charge carriers called holes, while the negative are called electrons. After a desecration process, in the P type silicon formed holes (positive charge carriers) in a very large number compared with the electron. Therefore, in the P type silicon holes are majority charge carriers, while the electrons are minority carriers. Conversely, in the N type silicon is formed of electrons in a very large number so-called majority carriers, and holes called minority carriers.
In the silicon rod there was interaction between the P and the N. Therefore called the PN junction. When present, the P associated with the positive pole of a battery, while the negative polar associated with the N, then there is a relationship called “forward bias”.
Under forward bias, electrical currents arise in a series due to both types of charge carriers. So the electric current flowing in the PN junction is caused by the movement of electron and the movement of holes. An electric current is flowing in the direction of holes movement, but opposite direction with the movement of electrons. Just to further explain, electrons moving in the conductor material can lead to electrical energy. And electrical energy is called as an electric current that flows in the opposite direction to the movement of electrons.
But, if the P associated with negative pole of batteries and the N associated with positive pole, then now formed a relationship called “reverse bias”. In these circumstances, the hole (positive charge carriers) can be connected directly to the positive pole, while the electrons are also directly to the positive pole. So, clearly in the PN junction there is no movement of majority charge carriers either the holes or electrons. Meanwhile, the minority charge carriers (electrons) in the part P moves trying to reach the positive pole of the batteries. Similarly, the minority charge carriers (holes) in the N also moved to reach the negative pole. Therefore, in a state of reverse bias, in the PN junction there is also output current even in very small amounts (micro amperes). This current is often called the reverse saturation current or leakage current.
.
Anything interesting in reverse bias. When the temperature of PN junction raised they will be able to enlarge leakage current. Means that if given the energy (heat), the minority charge carriers in the PN junction grows. Because the light is one form of energy, so if there is light that hit a PN junction may also produce enough energy to generate charge carriers. This symptoms are called photoconductive. Based on the photoconductive symptoms made of photodiode electronic components from PN junction.
In reverse bias, with increasing intensity of light that hit photodiode can increase the level of leakage current. Leakage currents can also be enlarged by increasing the battery voltage (reverse voltage), but the addition of leakage currents were not significant. When the batteries in the reverse bias circuit is removed and replaced with a load of resistance, the provision of light that can cause charge carriers both holes and electrons. If the illumination light is increased, current output was greater. Such symptoms are called photovoltaic. Light can provide enough energy to enlarge the number of holes in the P and the number of electrons on the N. Based on the symptoms of this photovoltaic electronic components can be created photovoltaic cell. Because usually the sun as a source of light, the photovoltaic cell is also called the solar cell (solar cells) or a solar energy converter.
So the solar cell is essentially a large photo diode and designed by referring to the photovoltaic symptoms so that could produce the greatest possible power. P type silicon is the very thin surface layer so that light can penetrate directly reach the junction. Part P is given ring-shaped nickel layer, as a positive output terminal. Under the P is the N type that is coated with nickel as well as the negative output terminal.
To obtain a large enough power required much of solar cells. Usually, solar cells arranged form the shape of the panel, and is called the photovoltaic panels (PV). PV as a source of electric power was first used in satellites. Then PV as an energy source for cars, so there are solar electric car. Now, in foreign countries, PV has started to be used as a roof or wall of the house. Sanyo has made even a semi-transparent PV that can be used as a substitute for glass.
After getting the output of the solar cell is a direct electrical current can be used to load utilized. But also the electric current can be used as a charge stored by the battery to be used when needed, especially at night because there was no sun.
If the solar cell is used for storage into the battery, then the resulting voltage magnitude must be above the battery specification. For example the battery used is 12 volts, the voltage produced by solar cell must be above 12 volts in order to perform charging.
We recommend that before carrying out the charging battery should be empty because the incoming flow will be filled with the maximum. The unit capacity of a battery is the Ampere-hour (Ah) and these characteristics are usually found on the label of a battery. For example a battery with 10 Ah capacity will fill up for 10 hours with the solar cell output currents of 1 Ampere.
Grid-connected system was applied to many urban areas housing, existing electricity network. The purpose of using solar panels, to save the cost of excessive electricity consumption and help reduce the greenhouse effect caused by the use of fossil fuels which cause excessive air pollution. Electrical energy which is in turn, channeled into the electricity networks that already exist and can be stored in the electricity network. This term is called the Hybrid System, which combine solar power plants with electricity network. Solar systems can also be combined with other power plants such as PV-Generator Hybrid, Hybrid PV-Microhydro, Hybrid PV-Wind and can even be combined into 3 systems of different power to Hybrid PV-Wind-Generator.
The following illustration application of grid connected systems in housing
Caption:
1. Solar panels installed at suitable locations to generate optimal power.
2. Inverter (Controller) function to change direct current (DC) produced by PV into alternating current (AC) that can be applied to household electronic equipment.
3. Box distribution function to distribute the AC current through the PV generated electricity network.
4. Discharging the burden of household air-conditioning system.
5. Electric meter show the current of electricity network will b
Choosing the right science project for young people to do should include the concept of helping them become more involved in today’s important global issues. A science project on solar panels could be just the thing for them to gain a better understanding of how the energy crisis is affecting us and what they can do about it.
The world as we know it today has undergone drastic changes in the last few decades. Consider the past one hundred years of industry and the damaging effects this has played on the environment. Our lakes, oceans, and rivers are in a pitiable state. The very air that we breathe is infused with pollutants that make us sick. Natural disasters are becoming more occurent and destroy millions in property while killing hundreds of lives each year. The energy sources that have provided the power to fuel so-called economic and technological development and progress have taken their toll on our fragile environment. And the younger and future generations are the ones who are going to pay for the follies of the older generations who thoughtlessly abused our natural resources and the environment.
Teach Your Pupils This School Science Project
It has come to a point that the very survival of the human race is being questioned as being endangered in the coming years. The abuse of Mother Nature and her bounty has led to massive pollution throughout the globe. The biggest impact has been those of fossil fuels polluting, not only the atmosphere but, the water and other resources that maintain our survival. The mining of such fuels causes irreversible damage to the nearby environment.
They are a probable contributor to global warming, which threatens to melt the polar ice caps that could lead uncontrollable floods. The sulphur oxide emissions produced by fossil fuels cause harmful acid rain. Because fossil fuels cannot be recycled, they will eventually run out. The fact that our fossil fuel resources are fast depleting is a serious issue which we will have to face or else we can no longer have sufficient sources of energy to support human civilization.
High School Solar Panel Project
These all being said, you can imagine how educating the future generations of our world about energy efficiency can help in saving what remains of our energy sources and rebuilding the damage fossil fuels have done. The energy crises, the harmful consequences of fossil fuel use on the environment – our young people should be made aware as to how these are both significant issues that affect the very survival of the human race as we know it today.
Knowledge is a powerful weapon which can arm the future generations in their fight to rescue our ailing planet through resolving the issues on energy sources. Putting it into application makes it even more powerful. Showing the young ones the application of that knowledge is the best means to get their interest and win their support.
The Theory and Pracitical on a DIY Solar Panel Project
Imagine the future effects on the energy crises if pupils and students in all learning establishments were to undertake a school science project that included theory and the building of a solar panel. Solar panels harnessing the energy from sun rays are very appropriate to demonstrate to the youth the alternative energy solutions that are available. Doing the project by themselves will help them realize just how efficient solar power is. Harnessing power from the sun is a concept that young people of today should be familiar with. Let them have a hands-on project on alternative energy sources such as this one and this will help everyone benefit from the knowledge that the energy and environmental crises can be solved with modern scientific solutions.
In general, energy sources are categorized into two parts namely non-renewable energy and renewable energy. Fossil energy sources are among the first group that the bulk of activity in the world using these conventional energy.
It is no doubt that the solar photovoltaic is one source of environmentally friendly energy and is very promising in the future, because there is no pollution produced during the process of energy conversion, and more widely available source of energy in nature, namely the sun.
Fundamental issues in solar cell technology is a very low efficiency in turning solar energy into electrical energy, which to date the highest efficiency can be achieved no more than 20%, and even then in a laboratory scale.
For that in developed countries, research on solar cell is a very big concern, especially with the issue of environmental clean.
From light into electricity
In a simple solar photovoltaic consists of the p-type and n junction semiconductor material (pn junction semiconductor) that if by the sun there will be a flow of electrons, electron flow is well known as the electric current flow. While the structure of the solar cell is as shown in Figure 1.
Figure 1. Structure of a thin layer of solar photovoltaic in general
The main part of the energy changes of sunlight to electricity is the absorber, however, each layer is also very influential on the efficiency of the solar cell. Sunlight consists of various types of electromagnetic waves in a spectrum can be seen in figure 2. Therefore here absorber is expected to absorb as much solar radiation derived from sunlight.
Figure 2. The spectrum of solar radiation
More detail can be explained that the sun consists of a photon-photon, if it happen to solar cell surface material (absorber), will be absorbed, reflected or simply passed (see Figure 3), and only photons with certain energy level that will liberate electrons from atomic bonds, so that electrical current flows. Energy levels is called band-gap energy which is defined as the amount of energy required to discharge electrons out of its covalent bond so that there electric current flow. To free electron from its covalent bond, photon energy (hc/v) must be slightly larger or above than the band-gap energy. If the photon energy is too much of the energy band-gap, then the extra energy will be converted in the form of heat in a solar cell. Therefore it is important to the solar cell to regulate the materials used, namely by modifying the molecular structure of the semiconductor used.
Figure 3. Radiative transition of solar photovoltaic
Of course, that the efficiency of solar cell can be high if the photons from sunlight to be absorbed that as much, then reduce reflection and increase recombination and conductivity of the material.
To be able to make that a photon is absorbed can be as much, then the absorber must have an energy band-gap with a wide range, making it possible to absorb sunlight so energy has a variety of these. One of the many materials being studied are known CuInSe2 is one of the direct semiconductor.
So many advantages of solar photovoltaic as described above was not a polemic and not just stop, saying there was a solar photovoltaic is true when the energy change process there is no pollution produced, but have we calculated how much pollution has been generated in the process manufacturing, small compared to the resulting efficiency. Now the challenge here is indeed how to increase efficiency, which would affect its economic value.
Article You May Be Interested In Reading: Solar Electric
Executive Summary about Solar Collector by Armand Hadife
Solar energy is accessible in plentiful places around the world. This high temperature produced can be exploited for heating air or water in houses and buildings
Using solar energy is a natural and affordable approach for spaces or water heating. When using solar power for heating purposes you employ a device that will allow capturing the heat of the sun. This device is called a solar collector. A basic solar collector can be made with no difficulties.
The next step is to find a system to help circulate water or air inside the solar collector. In general, devices like fans and pumps are used to push air or water thru the solar collector and from the storage tank to the house.
For the novice, making a solar collector can be a difficult and demanding project. This is why solar collectors are broadly offered online and in solar products shops.
How to Build a Solar Collector
Executive Summary about Solar Collector by Mick Jeys
Building a solar collector is the best way to save money on electricity bills, and can be used to generate electricity or to heat water. The two most popular uses for solar collectors are to heat water and generate electricity.
Solar Collector To Generate Electricity
Typically known as a solar cell or panel, they are typically made from titanium dioxide, and create electricity through the photovoltaic effect. It is now very simple to build your own generator at home quite cheaply by substituting titanium dioxide with cuprous oxide.
Solar Collector To Heat Water
The most common example of this type can be seen in common solar hot water systems, where the hot water tank is actually up on the roof with the solar collector. Trials are being held in Germany to use solar heated water from the summertime to heat homes in the winter.
Article You May Be Interested In Reading: Garden Solar Lights
Executive Summary about Solar Battery Charger by Anna Stone
Solar Battery Chargers are used to charge your batteries when you are not connected to the power grids and do not have access to another form of electricity. The way a Solar Charger works is simple. The solar panel of the battery charger collects energy from the sun and converts this into electricity. Now, there are many different types of solar battery chargers, as well as different types of batteries you might want to charge. Some solar chargers are more powerful than others. As all solar battery chargers use some type of solar panel, the amount of power they generate generally depends on the size of the panels. Solar panels are made up of individual solar cells. Solar cells are the units which create electricity out of sunlight. The more solar cells there are on a solar panel, the more electricity they create. So you will generally find that bigger solar panels produced more energy, and smaller solar panels produce less.
Some solar battery chargers work with simple AA batteries, like those that you would use to run a flashlight. Some charge the batteries of your equipment, such as the battery in your laptop computer.
You might ask why one uses a solar charger to charge a battery, instead of just directly running one’s equipment from a solar panel.
The sun’s heat might damage your cell phone. There are a variety of solar battery chargers and other portable solar power devices available on the market today. Further information and answers to common questions can be found at Solar Chargers and Portable Solar Power Devices.
How Solar Powered Battery Chargers Can Ease Your Everyday’s Life
Executive Summary about Solar Battery Charger by Assaf Katzir
Solar battery charger is one of these devices that became a necessity once we have all these electric devices that we use on a daily basis. iPod, laptop, mobile phone, PDA, GPS etc’ just name it. There are portable flexible solar panels that you can place in your small bag and use them to charge your electrical devices’ batteries when you need to without being attached to any electrical grid outlet. Most solar chargers are equipped with plug kits which match to variety of electric devices. The variety of solar chargers’ sizes, shapes and uses continue to grow rapidly.
There is no usage cost when using solar battery chargers as opposed to the utility electricity chargers. No pollution released to the atmosphere when using portable solar charger and no chemicals leached into our ground water when discarded since we are using rechargeable batteries, so you contribute to keep environment clean, not to mention that you save money when you use a solar charger.
As you can see there are many benefits and advantages while using solar powered battery charger.
Article You May Be Interested In Reading: Solar Heater
Executive Summary about Solar Electric by Klaus H Hemsath
Promotion of solar power generation is booming. Why are solar farms built when financial data clearly show that solar power is still the most expensive electricity generation technology available?
Solar power plant developers and marketers obviously know that they need to lower costs. Cost reduction is, however, expensive and takes time. There are two major technologies for solar energy conversion. Electricity production with steam is a very mature technology. The other technology is the direct, photovoltaic conversion of sunlight into electricity. This technology will most likely become the dominant solar electric power generating technology – eventually. The concentrated sunshine creates very high surface temperatures on the solar panel. To save solar panel area and make the solar panel price competitive, one must cool the surface of the solar panel very efficiently to prevent it from melting and destruction.
Present production costs for generating electricity with solar panels are hovering around $0.50 per kWh. Right now, solar power does not yet make economical sense.
None of the available technologies using renewable energy can compete with the cost of electricity generation from coal.
The technologies for generating electricity with solar power, wind power, marine power, and geothermal power are very well understood. At present, a respectable number of windmill farms and solar panel farms are being installed. Solar power does not make economical sense, yet. A random sampling of recent announcements of solar farm installations reveals that system installation costs are in the $3000 to $7500 per kW installed capacity. These plant costs loosely translate into a cost of producing electric power at $0.30 to $0.60 per kWh. This very unfavorably compares to the cost of electricity generation by any other technology.
As long as solar power constitutes only a very small fraction of overall electric power generation, the additional costs of storing intermittently produced electric power are not yet of concern. If the US is going to depend significantly on the intermittent production of electricity from solar power and wind power, it must begin to develop storage technologies for huge amounts of electric energy. Intermittent, renewable energies and electric energy storage are inseparable.
The Solar Electric Panel – An Inexpensive Way to Generate Electricity
Executive Summary about Solar Electric by Dan A Swanson
The solar electric panels, generally called solar photovoltaic panels, are made of a set of treated silicon cells arranged in a series array. They produce electricity on being exposed to the sunlight. A small solar electric panel will lessen the energy bills considerably, while a big solar panel will in fact budge the meter backwards. The contemporary solar electric panels are simple to install and are modular. The solar electric panels transform the sunlight to DC (direct current) electricity. Buy any of these solar electric panels according to your requirements.
Solar electric panels are the perfect answer to our increasing electricity bills and ever increasing reliance on depleting conventional energy resources. Make a one time investment in solar panels and generate free electricity for years to come. Solar electric panels are the need of the hour.
