Terry Hope has created the THEKPV (The Hybrid Electric Kinetic Photovoltaic Vehicle), a solar powered bike that is powered by a 50W array of solar panels and has a capacitor for boosting its acceleration capabilities.
Adventures in microsolar supported by microelectronics and MEMS techniques
Representative thin crystalline-silicon photovoltaic cells – these are from 14 to 20 micrometers thick and 0.25 to 1 millimeter across.
Sandia National Laboratories scientists have developed tiny glitter-sized photovoltaic cells that could revolutionize the way solar energy is collected and used.
The tiny cells could turn a person into a walking solar battery charger if they were fastened to flexible substrates molded around unusual shapes, such as clothing.
The solar particles, fabricated of crystalline silicon, hold the potential for a variety of new applications. They are expected eventually to be less expensive and have greater efficiencies than current photovoltaic collectors that are pieced together with 6-inch- square solar wafers.
The cells are fabricated using microelectronic and microelectromechanical systems (MEMS) techniques common to today’s electronic foundries.
Sandia lead investigator Greg Nielson said the research team has identified more than 20 benefits of scale for its microphotovoltaic cells. These include new applications, improved performance, potential for reduced costs and higher efficiencies.
“Eventually units could be mass-produced and wrapped around unusual shapes for building-integrated solar, tents and maybe even clothing,” he said. This would make it possible for hunters, hikers or military personnel in the field to recharge batteries for phones, cameras and other electronic devices as they walk or rest.
Sandia project lead Greg Nielson holds a solar cell test prototype with a microscale lens array fastened above it. Together, the cell and lens help create a concentrated photovoltaic unit.
Even better, such microengineered panels could have circuits imprinted that would help perform other functions customarily left to large-scale construction with its attendant need for field construction design and permits.
Said Sandia field engineer Vipin Gupta, “Photovoltaic modules made from these microsized cells for the rooftops of homes and warehouses could have intelligent controls, inverters and even storage built in at the chip level. Such an integrated module could greatly simplify the cumbersome design, bid, permit and grid integration process that our solar technical assistance teams see in the field all the time.”
For large-scale power generation, said Sandia researcher Murat Okandan, “One of the biggest scale benefits is a significant reduction in manufacturing and installation costs compared with current PV techniques.”
Part of the potential cost reduction comes about because microcells require relatively little material to form well-controlled and highly efficient devices.
From 14 to 20 micrometers thick (a human hair is approximately 70 micrometers thick), they are 10 times thinner than conventional 6-inch-by-6-inch brick-sized cells, yet perform at about the same efficiency.
100 times less silicon generates same amount of electricity
“So they use 100 times less silicon to generate the same amount of electricity,” said Okandan. “Since they are much smaller and have fewer mechanical deformations for a given environment than the conventional cells, they may also be more reliable over the long term.”
Another manufacturing convenience is that the cells, because they are only hundreds of micrometers in diameter, can be fabricated from commercial wafers of any size, including today’s 300-millimeter (12-inch) diameter wafers and future 450-millimeter (18-inch) wafers. Further, if one cell proves defective in manufacture, the rest still can be harvested, while if a brick-sized unit goes bad, the entire wafer may be unusable. Also, brick-sized units fabricated larger than the conventional 6-inch-by-6-inch cross section to take advantage of larger wafer size would require thicker power lines to harvest the increased power, creating more cost and possibly shading the wafer. That problem does not exist with the small-cell approach and its individualized wiring.
From left to right, Sandia researchers Murat OKandan, Greg Nielson, and Jose Luis Cruz-Campa, hold samples containing arrays of microsolar cells.
Other unique features are available because the cells are so small. “The shade tolerance of our units to overhead obstructions is better than conventional PV panels,” said Nielson, “because portions of our units not in shade will keep sending out electricity where a partially shaded conventional panel may turn off entirely.”
Because flexible substrates can be easily fabricated, high-efficiency PV for ubiquitous solar power becomes more feasible, said Okandan.
A commercial move to microscale PV cells would be a dramatic change from conventional silicon PV modules composed of arrays of 6-inch-by-6-inch wafers. However, by bringing in techniques normally used in MEMS, electronics and the light-emitting diode (LED) industries (for additional work involving gallium arsenide instead of silicon), the change to small cells should be relatively straightforward, Gupta said.
Each cell is formed on silicon wafers, etched and then released inexpensively in hexagonal shapes, with electrical contacts prefabricated on each piece, by borrowing techniques from integrated circuits and MEMS.
Offering a run for their money to conventional large wafers of crystalline silicon, electricity presently can be harvested from the Sandia-created cells with 14.9 percent efficiency. Off-the-shelf commercial modules range from 13 to 20 percent efficient.
A widely used commercial tool called a pick-and-place machine — the current standard for the mass assembly of electronics — can place up to 130,000 pieces of glitter per hour at electrical contact points preestablished on the substrate; the placement takes place at cooler temperatures. The cost is approximately one-tenth of a cent per piece with the number of cells per module determined by the level of optical concentration and the size of the die, likely to be in the 10,000 to 50,000 cell per square meter range. An alternate technology, still at the lab-bench stage, involves self-assembly of the parts at even lower costs.
Solar concentrators — low-cost, prefabricated, optically efficient microlens arrays — can be placed directly over each glitter-sized cell to increase the number of photons arriving to be converted via the photovoltaic effect into electrons. The small cell size means that cheaper and more efficient short focal length microlens arrays can be fabricated for this purpose.
High-voltage output is possible directly from the modules because of the large number of cells in the array. This should reduce costs associated with wiring, due to reduced resistive losses at higher voltages.
Other possible applications for the technology include satellites and remote sensing.
The project combines expertise from Sandia’s Microsystems Center; Photovoltaics and Grid Integration Group; the Materials, Devices, and Energy Technologies Group; and the National Renewable Energy Lab’s Concentrating Photovoltaics Group.
Involved in the process, in addition to Nielson, Okandan and Gupta, are Jose Luis Cruz-Campa, Paul Resnick, Tammy Pluym, Peggy Clews, Carlos Sanchez, Bill Sweatt, Tony Lentine, Anton Filatov, Mike Sinclair, Mark Overberg, Jeff Nelson, Jennifer Granata, Craig Carmignani, Rick Kemp, Connie Stewart, Jonathan Wierer,
George Wang, Jerry Simmons, Jason Strauch, Judith Lavin and Mark Wanlass (NREL).
The work is supported by DOE’s Solar Energy Technology Program and Sandia’s Laboratory Directed Research & Development program, and has been presented at four technical conferences this year.
The ability of light to produce electrons, and thus electricity, has been known for more than a hundred years.
Executive Summary about Solar Lighting by Simon Harris
Outdoor solar lighting adds to the looks, or curb appeal, of a home. Because there are so many designs and styles of outdoor solar lighting, people can use them anywhere.
How Solar Lights Function
Small photovoltaic cells turn sunlight into solar electricity.
Options for Solar Lights
Some outdoor solar lights turn on when they detect motion. Other solar lights remain on from dusk until dawn.
Disadvantages of Solar Lights
There’s only one common flaw with solar lights.
Benefits of Solar Lights
One of the most talked-about benefits today is the fact that solar lights are an eco-friendly alternative to the traditional, electricity-using outdoor lights. Solar lights are also a fairly inexpensive option in terms of both purchasing and use. Finally, solar lights are easy to install. With traditional outdoor walkway lighting, for example, users needed to dig a trench and bury the wire that connected the lights to the power source. In the end, outdoor solar lighting may be the wave of the future.
10 Uses for Outdoor Solar Lights
Executive Summary about Solar Lighting by Dave Joa
Solar Lighting can be used in many ways
Here are just a few examples of practical applications for outdoor solar lighting:
1. Solar Accent Lights
For specialist use in the yard or garden these are designed for accent lighting along the edges of driveways, walkways, paths and entrances to homes, garages and other buildings.
2. Solar Lanterns
Typically these solar light fixtures include many different and unique designs of solar lights to enhance any part of your garden and yard.
3. Solar Motion Sensor Lights
Because solar lights are easy to install they can be located in those places where traditional lights and the wiring required are a problem.
4. Solar Spot Lights
Use solar spots to light up any individual objects outside you home such as trees, bushes, a flower bed, statues or even a pond or stream.
5. Solar Flood Lights
If you want to light a much larger area then solar flood lights will help you to do this.
6. Solar Sign Lights
7. Solar Pond and Pool Lights
Today you can now get small solar powered lights in a wide rage of different colors that will float permanently in your pool or pond to giving a dramatic and potentially moving light show all night long.
8. Solar Flag Light
Just like the solar sign lights there are now specialist lights for lighting the flag on your flag pole if you have one or the whole flag and pole together.
9. Solar Rope Lights
These are great for creating great lighting effects anywhere in your yard and garden but especially on patios and decks, They can be run along anything such as under a deck railing or around things such as tree trunks and deck posts or hung on buildings or in trees.
10. Solar Christmas Lights
Yes, you now even get solar Christmas lights for your tree or other features outside and around your home.
