Danish design studio Difuss has introduced solar-powered handbag for girls containing about 100 smaller monocrystalline silicon solar cells on the surface of the bag resembles of beads. Handbag designed in a way display copper wiring and solar cell panels for maximum sun exposure. The energy generated is transferred to the lithium-ion batteries hidden in a small compartment in the bag. It can easily charge mobile devices in the bag.
Executive Summary about Sun Power by Richard Chapo
Generating electricity from the sun is all about converting sunlight into power. The technology behind solar systems is known as photovoltaic technology. Essentially, this technology involves using sunlight to create a chemical reaction. This process creates a direct current of electricity. The electricity is then converted to usable alternating current electricity and stored in a battery or fed into a utility grid system.
Revolutionary of photovoltaic applications in the architectural building has undergone rapid development, starting from ordinary technology to high technology in the 3rd generation, they are:
1. First generation (the 1980s)
PV panel module with an iron framework just mounted on the field of building flat roof with a brace (tracking).
2. Second generation (the 1990s)
Photovoltaic cells (PV) developed more integrated part of building materials: roof materials (tiles, shingles).
Terry Hope has created the THEKPV (The Hybrid Electric Kinetic Photovoltaic Vehicle), a solar powered bike that is powered by a 50W array of solar panels and has a capacitor for boosting its acceleration capabilities.
Solarve (Solar Vehicle), the first solar-cell-equipped public bus in the world, recently announced by Sanyo in Japan. The bus was revealed to memorialize the 100th anniversary of Ryobi, a Japanese transportation and logistics company.
The Solarve is basically a city bus with solar cells on top that generate power for its interior LED lightings.
Sanyo says the bus solar panels generate total power of 798 watts (420 watts through crystalline silicon cells, and 378 watts through amorphous silicon cells). Power will be supplied by storage batteries inside the bus about nine hours for a long winter, or extended periods of time without sunlight.
The Solarve expected to be first used as a beginning September 1 (in Okayama City in southern Japan).
Adventures in microsolar supported by microelectronics and MEMS techniques
Representative thin crystalline-silicon photovoltaic cells – these are from 14 to 20 micrometers thick and 0.25 to 1 millimeter across.
Sandia National Laboratories scientists have developed tiny glitter-sized photovoltaic cells that could revolutionize the way solar energy is collected and used.
The tiny cells could turn a person into a walking solar battery charger if they were fastened to flexible substrates molded around unusual shapes, such as clothing.
The solar particles, fabricated of crystalline silicon, hold the potential for a variety of new applications. They are expected eventually to be less expensive and have greater efficiencies than current photovoltaic collectors that are pieced together with 6-inch- square solar wafers.
The cells are fabricated using microelectronic and microelectromechanical systems (MEMS) techniques common to today’s electronic foundries.
Sandia lead investigator Greg Nielson said the research team has identified more than 20 benefits of scale for its microphotovoltaic cells. These include new applications, improved performance, potential for reduced costs and higher efficiencies.
“Eventually units could be mass-produced and wrapped around unusual shapes for building-integrated solar, tents and maybe even clothing,” he said. This would make it possible for hunters, hikers or military personnel in the field to recharge batteries for phones, cameras and other electronic devices as they walk or rest.
Sandia project lead Greg Nielson holds a solar cell test prototype with a microscale lens array fastened above it. Together, the cell and lens help create a concentrated photovoltaic unit.
Even better, such microengineered panels could have circuits imprinted that would help perform other functions customarily left to large-scale construction with its attendant need for field construction design and permits.
Said Sandia field engineer Vipin Gupta, “Photovoltaic modules made from these microsized cells for the rooftops of homes and warehouses could have intelligent controls, inverters and even storage built in at the chip level. Such an integrated module could greatly simplify the cumbersome design, bid, permit and grid integration process that our solar technical assistance teams see in the field all the time.”
For large-scale power generation, said Sandia researcher Murat Okandan, “One of the biggest scale benefits is a significant reduction in manufacturing and installation costs compared with current PV techniques.”
Part of the potential cost reduction comes about because microcells require relatively little material to form well-controlled and highly efficient devices.
From 14 to 20 micrometers thick (a human hair is approximately 70 micrometers thick), they are 10 times thinner than conventional 6-inch-by-6-inch brick-sized cells, yet perform at about the same efficiency.
100 times less silicon generates same amount of electricity
“So they use 100 times less silicon to generate the same amount of electricity,” said Okandan. “Since they are much smaller and have fewer mechanical deformations for a given environment than the conventional cells, they may also be more reliable over the long term.”
Another manufacturing convenience is that the cells, because they are only hundreds of micrometers in diameter, can be fabricated from commercial wafers of any size, including today’s 300-millimeter (12-inch) diameter wafers and future 450-millimeter (18-inch) wafers. Further, if one cell proves defective in manufacture, the rest still can be harvested, while if a brick-sized unit goes bad, the entire wafer may be unusable. Also, brick-sized units fabricated larger than the conventional 6-inch-by-6-inch cross section to take advantage of larger wafer size would require thicker power lines to harvest the increased power, creating more cost and possibly shading the wafer. That problem does not exist with the small-cell approach and its individualized wiring.
From left to right, Sandia researchers Murat OKandan, Greg Nielson, and Jose Luis Cruz-Campa, hold samples containing arrays of microsolar cells.
Other unique features are available because the cells are so small. “The shade tolerance of our units to overhead obstructions is better than conventional PV panels,” said Nielson, “because portions of our units not in shade will keep sending out electricity where a partially shaded conventional panel may turn off entirely.”
Because flexible substrates can be easily fabricated, high-efficiency PV for ubiquitous solar power becomes more feasible, said Okandan.
A commercial move to microscale PV cells would be a dramatic change from conventional silicon PV modules composed of arrays of 6-inch-by-6-inch wafers. However, by bringing in techniques normally used in MEMS, electronics and the light-emitting diode (LED) industries (for additional work involving gallium arsenide instead of silicon), the change to small cells should be relatively straightforward, Gupta said.
Each cell is formed on silicon wafers, etched and then released inexpensively in hexagonal shapes, with electrical contacts prefabricated on each piece, by borrowing techniques from integrated circuits and MEMS.
Offering a run for their money to conventional large wafers of crystalline silicon, electricity presently can be harvested from the Sandia-created cells with 14.9 percent efficiency. Off-the-shelf commercial modules range from 13 to 20 percent efficient.
A widely used commercial tool called a pick-and-place machine — the current standard for the mass assembly of electronics — can place up to 130,000 pieces of glitter per hour at electrical contact points preestablished on the substrate; the placement takes place at cooler temperatures. The cost is approximately one-tenth of a cent per piece with the number of cells per module determined by the level of optical concentration and the size of the die, likely to be in the 10,000 to 50,000 cell per square meter range. An alternate technology, still at the lab-bench stage, involves self-assembly of the parts at even lower costs.
Solar concentrators — low-cost, prefabricated, optically efficient microlens arrays — can be placed directly over each glitter-sized cell to increase the number of photons arriving to be converted via the photovoltaic effect into electrons. The small cell size means that cheaper and more efficient short focal length microlens arrays can be fabricated for this purpose.
High-voltage output is possible directly from the modules because of the large number of cells in the array. This should reduce costs associated with wiring, due to reduced resistive losses at higher voltages.
Other possible applications for the technology include satellites and remote sensing.
The project combines expertise from Sandia’s Microsystems Center; Photovoltaics and Grid Integration Group; the Materials, Devices, and Energy Technologies Group; and the National Renewable Energy Lab’s Concentrating Photovoltaics Group.
Involved in the process, in addition to Nielson, Okandan and Gupta, are Jose Luis Cruz-Campa, Paul Resnick, Tammy Pluym, Peggy Clews, Carlos Sanchez, Bill Sweatt, Tony Lentine, Anton Filatov, Mike Sinclair, Mark Overberg, Jeff Nelson, Jennifer Granata, Craig Carmignani, Rick Kemp, Connie Stewart, Jonathan Wierer,
George Wang, Jerry Simmons, Jason Strauch, Judith Lavin and Mark Wanlass (NREL).
The work is supported by DOE’s Solar Energy Technology Program and Sandia’s Laboratory Directed Research & Development program, and has been presented at four technical conferences this year.
The ability of light to produce electrons, and thus electricity, has been known for more than a hundred years.
Solar panels are generally made from crystalline or amorphous silicon. Amorphous means that the solar cells does not have a crystal structure. When you see a lot of solar panels, you will notice a mosaic pattern. This mosaic is different silicon crystals that grow together in different orientations.
amorphous silicon solar
Amorphous type silicon solar panel do not have a crystal structure. Amorphous silicon is as a glass or obsidian. The silicon atoms are all frozen together in a random way. However, in crystalline type silicon solar panels, the silicon forms a lattice or regular repeating crystal structure.
Excess crystalline type solar cells is that they are generally more efficient. However, the crystals need time to grow and therefore more expensive to produce.
Amorphous silicon panels cheaper to produce, because no crystal structure that needs time to form. However, the amorphous solar panel is less efficient.
Some solar panel manufacturers such as Sanyo has been producing solar panels that use a combination of amorphous and crystalline silicon for maximum effect. High efficiency crystalline silicon can be used to capture most of the energy, but the various layers of amorphous silicon is added to capture what is left.
So, what amorphous construction silicon panels? They are solar panels made from a non-crystalline variety of silicon.
Note: When purchasing crystalline or amorphous silicon panel it is important to consider the cost with efficiency. A crystalline silicon panel may be very efficient, but cost can be overcome benefits. Amorphous panel less efficient, but they are also cheaper. So, there is always a balance between costs and benefits.
Article You May Be Interested In Reading: Solar House
Executive Summary about Solar Technology by Philip Richards
In the business of solar energy, the U.S. has not been the biggest buyer of solar power. While the U.S. does quite well exporting solar panels and solar technology, there are many Americans who still find the cost of panels very prohibitive. As the price of solar energy decreases, Europe has had a much higher demand for solar power than anywhere else in the world. Many European universities and campuses have rebuilt their dorms to run off solar energy. Most water heaters in Europe are solar-powered, even if the home doesn’t have a full solar panel system.
In Europe, it’s not just small residential power systems that are leading the way in solar energy dependence. Specifically, Italy, Greece and the Czech Republic are the newest customers of solar power systems. These countries have begun to purchase so much solar energy that their borders have seen changes in tariffs for solar panels. Japan, who’s also been at the forefront of solar panel imports, has picked up solar panel buying as the cost of gas and electricity rises. There are entire neighborhoods in Japan outfitted with residential solar power panels. For example, the neighborhood of Iwaki New Town has about 46 homes outfitted with full private solar power panels. Japan also uses solar energy in surprising places. Japan is the only country to power most of its vending machines with solar energy. Sharp, one of the largest solar panel producing companies in Japan estimates that by 2010, Japan will produce 4.8 million kWh of solar energy.
The Race For New Solar Technology Is On
Executive Summary about Solar Technology by Winifred Churchill
Companies around the world are beginning to seriously consider the POWER of solar power.
One criticism of solar energy is that it cannot be relied upon for a steady supply of energy, but there are projects underway which are addressing that issue. In short, solar technology is going the way of the computer industry or cell phones. Now you get the same functionality available in personal computers on tiny cell phones. The new silicon cells for solar panels may bring a similar revolution to solar power making it a reliable, clean source of energy.
Article You May Be Interested In Reading: Wind Generators
Executive Summary about Home Solar Panels by Valt Jones
Home solar panels are the desirable solution for anyone willing to substitute the polluting energy created by fuel-supplied energy plants with green and renewable source of energy. Home solar panels can either turn sunlight into electricity or hot water.
Home solar panels are smaller and inexpensive nowadays, while the rewards have grown exceedingly. Installation of home solar energy systems has become its own licensed specialty performed by licensed home solar contractors. These solar panels are the most consistent source of harvesting energy for residential solar power generation, doing better than the solar cells of previous decades. Marine and RV solar panels and specialty items, such as Powerflex flexible and portable solar panels, are also available.
You will require less home solar panels to collect the necessary energy if the sun is shining often. Home solar panels are generally designed for high voltage grid-connected systems, although they can be used for battery-based systems too. Solar panels that use single crystalline solar cells offer among the record efficiencies obtainable on today’s commercial market.
Home Solar Panels – 5 Benefits of Building a Cheap Solar Power System
Executive Summary about Home Solar Panels by Garry Jones
Earth’s fossil fuel reserves are rapidly diminishing and the price of energy is skyrocketing. More people are turning to free alternative sources of energy and many are finding great success with building home solar panels. In this article we will analyze some of the benefits of building home solar panels.
Join the tens of thousands of homeowners who are building home solar panels and reaping huge savings on their energy costs. Fossil fuel prices will continue rising, solar power will always be free.
Article You May Be Interested In Reading: Solar Garden Lights
